Panasonic DMC-L10K Taking Pictures using the Built-in Flash, Press MENU/SET to close MF assist

Advanced

4 Press [MENU/SET] to close MF assist.

MENU /SET

•The screen returns to the previous screen.

•The MF assist disappears in the following cases.

–About 10 seconds after you stop pressing 3/4/2/1 or rotating the focus ring

–When the shutter button is pressed halfway

•The MF assist returns to the center of the screen when the camera is turned off and then on again.

•You cannot use MF assist when using the digital zoom.

Taking Pictures using the Built-in Flash

A OPEN B

ATo open the flash

Slide the [ OPEN] lever.

BTo close the flash

64

Press the flash until it clicks.

•Be sure to close the flash when not in use.

•The flash setting is fixed to Forced OFF [ ] while the flash is closed.

∫Switching to the appropriate flash setting

Set the flash to match the recording.

1 Press [MENU/SET] to display the menu.

2Press 3/4/2/1 to select

[FLASH] in the [REC] menu [] and then press 1.

3Press 3/4 to select the mode and then press [MENU/SET].

MENU /SET

•Refer to “Available flash settings by recording mode” on P66 for information about available flash settings.

•You can also use the front dial or the rear dial to select a menu item.

4 Press [MENU/SET] to close the menu.

•You can also press the shutter button halfway to close the menu.

•[ ] is displayed on the Viewfinder if you open the flash.

•You can also use [FUNC] to set. (P91)

VQT1G28