Panasonic DMC-L10K Connecting to a PC, 118, Press 3 to select PC and then press MENU/SET

Connecting to other equipment

Connecting to a PC

You can acquire recorded pictures to a PC by connecting the camera and the PC. The software [LUMIX Simple Viewer] or [PHOTOfunSTUDIO-viewer-]

(for Windows®) on the CD-ROM (supplied) allows you to easily acquire pictures recorded with the camera to a PC, print them and send them by e-mail.

If you use “Windows 98/98SE”, install the USB driver and then connect it to the computer.

Read the separate operating instructions for the supplied software for more information about the software in the CD-ROM (supplied) and how to install it.

D

A

ACCESS

C

B

AUSB connection cable (supplied) B DC cable (DMW-DCC1; optional) C This message appears during data

transfer.

118

•Use a sufficiently charged battery (P18) or the AC adaptor (P128).

•Turn the camera off and then insert or remove the cable for the AC adaptor (P128).

1 Turn on the camera and the PC.

2 Connect the camera to a PC via the USB connection cable A

(supplied).

•Connect the USB connection cable with

the [] mark facing the [2] mark on the [DIGITAL] socket.

•Hold the USB connection cable at D and insert straight in or take straight out. (If you forcibly insert the USB connection cable at a slant or upside down you can deform the connection terminals and damage the camera or the connected equipment.)

3 Press 3 to select [PC] and then press [MENU/SET].

USB MODE
PLEASE SELECT
THE USB MODE
PC
PictBridge(PTP)
		MENU
SELECT	SETMENU	/SET

•If you set [USB MODE] in the [SETUP] menu to [PC] in advance, it is not necessary to set this every time you connect to a PC. (P30)

•If you set [USB MODE] to

[PictBridge (PTP)] and then connect the camera to the PC, messages may appear on the screen of the PC. Select [CANCEL] to close the messages and disconnect the camera from the PC. Set [USB MODE] to [PC] again.

VQT1G28