Panasonic DMC-L10K 113, Multi setting, Number of prints icon B appears, To cancel all settings

Menu Settings

•The number of prints can be set from 0 to 999. The DPOF print setting is canceled when the number of prints is set to [0].

2 Press [MENU/SET] twice to close the menu.

∫Multi setting

1Press 2/1 to select the picture to print and then press 3/4 to set the number of prints.

B

•The number of prints icon [ ] B appears.

•Repeat the above procedure. (You cannot set all the pictures at one time.)

•The number of prints can be set from 0 to 999. The DPOF print setting is canceled when the number of prints is set to [0].

2 Press [MENU/SET] twice to close the menu.

∫To cancel all settings

1 Press 3 to select [YES] and then press [MENU/SET].

MENU /SET

2 Press [MENU/SET] to close the menu.

∫To print the date

After setting the number of prints, set/ cancel printing with the recording date by pressing [DISPLAY].

C

•The date print icon [ DATE ] C appears.

•When you go to a photo printing store for digital printing, be sure to order the printing of the date additionally if required.

•Depending on the photo printing store or the printer, the date may not be printed even if you set to print the date. For further information, ask at your photo printing store or refer to the operating instructions for the printer.

•DPOF is an abbreviation of “Digital Print Order Format”. This feature allows you to write print information to media and then use the information on a DPOF-compliant system.

•DPOF print setting is a convenient function when printing pictures with a printer that supports PictBridge. The date printing setting on the printer may take priority over the date printing setting on the camera. Check the date printing setting on the printer also. (P120)

•Some DPOF information set by other equipment cannot be used. In such cases, delete all of the DPOF information and then set it again with this camera.

•If the file is not based on the DCF standard, the DPOF print setting cannot be set. DCF is an abbreviation of “Design rule for Camera File system”, stipulated by “JEITA (Japan Electronics and Information Technology Industries Association)”.

•Pictures that were taken with the [QUALITY] set to [RAW] cannot be printed using DPOF print.

113

VQT1G28