Panasonic DMC-L10K operating instructions 119, Dcim, Misc

Connecting to other equipment

[Windows]

The drive appears in the [My Computer] folder.

•If you are connecting the camera to a PC for the first time, the required driver is installed automatically so that the camera can be recognized by “Windows Plug and Play”. The drive then appears on the

[My Computer] folder.

[Macintosh]

The drive is displayed on the screen.

•The drive is displayed as [NO_NAME] or [Untitled].

∫Folder Composition

Folders are displayed as shown in the following illustration.

≥Card	DCIM			100_PANA
				1
		100_PANA
			P1000001.JPG
	2			3	4

P1000002.JPG

P1000999.JPG

101_PANA

999_PANA

MISC

1Folder number

2 Color space P: sRGB

_: AdobeRGB

3File number

4 JPG:	Pictures
RAW:	Pictures in RAW files
MISC:	DPOF print
	Favorite

The items in each folder are as follows.

[DCIM]	Folders from [100_PANA] to
	[999_PANA]
[100_PANA]	Pictures/RAW files
to
[999_PANA]
[MISC]	Files on which the DPOF
	print settings are recorded,
	Favorites

•The data for up to 999 pictures recorded by the camera can be included in 1 folder. If the number of pictures exceeds 999, another folder is created.

•To reset the file number or the folder number, select [NO.RESET] in the [SETUP] menu. (P29)

∫Conditions under which a different folder number is used

The picture is not recorded in the same folder as the previously recorded picture in the following cases. It is recorded in a folder with a new number.

1When the folder just recorded to contains a picture file with the number

999 in it (example: P1000999.JPG).

2When the card just recorded to contains, for example, a folder with the number 100 [100_PANA] in it and that card is removed and replaced with a card that has a folder with the number 100 in it recorded by a camera from a different maker (100XXXXX, with XXXXX being the name of the maker)

and then a picture is recorded.

3When recording after selecting [NO.RESET] (P29) from the [SETUP] menu. (Pictures will be recorded to a new folder with a number sequential to the folder recorded to immediately before. By using [NO.RESET] on a card that does not contain folders or pictures, such as one just formatted, the folder number can be reset to 100.)

119

VQT1G28