Advanced

Taking pictures that match the scene being

recorded (Scene mode)

When you select a scene mode to match the subject and recording situation, the camera sets the optimal exposure and hue to obtain the desired picture.

Refer to P89 to 90 and “About the information ” for details about each scene mode.

1 Press 2/1 to select the scene mode.

2 Press [MENU/SET] to set.

The menu screen is switched to the recording screen in the selected scene mode.

To change the scene mode, press [MENU/SET] to display the menu, press 3/4/2/1 to select the scene mode in

the scene menu [] and then press [MENU/SET] again.

88

About the information

If you press [DISPLAY] when selecting a scene mode in step 1, explanations about

each scene mode are displayed. (If you press [DISPLAY] again, the screen returns to the [SCENE MODE] menu.)

The flash setting is memorized even if the camera is turned off. However, the scene mode flash setting is reset to the initial setting when the scene mode is changed.

When you take a picture with a scene mode that is not adequate for the purpose, the hue of the picture may differ from the actual scene.

If you press 2 when selecting [SUNSET]

in step 1, the [SCENE MODE] menu [] is selected. If you then press 4 and select

the [REC] mode menu [], the [SETUP] menu [] or the [CUSTOM MENU] menu [ ], you can set the desired items.

The following items cannot be set in scene mode because the camera automatically adjusts them to the optimal setting.

[SENSITIVITY]

[METERING MODE]

Items other than [STANDARD] and

[STANDARD] () in film mode.

VQT1G28

Page 88
Image 88
Panasonic DMC-L10K Taking pictures that match the scene being, Press 2/1 to select the scene mode Press MENU/SET to set