Panasonic DMC-L10K LCD Monitor, Canceling setting, Taking pictures at a low angle

Advanced

∫Canceling setting

If you press and hold [LCD MODE] again for 1 second the screen shown in step 2 is displayed. Select [OFF] to cancel a setting.

•The number of recordable pictures decreases in Auto power LCD mode or Power LCD mode.

•The brightness of the pictures displayed on the LCD monitor screen are increased in Auto power LCD and Power LCD. Therefore, some subjects may look different on the LCD monitor. However, this does not affect the recorded pictures.

•The LCD monitor automatically returns to normal brightness after 30 seconds when recording in Power LCD mode. Press any button to make the LCD monitor bright again.

•If the screen is difficult to see because of light from the sun etc. shining on it, use your hand or another object to block the light.

•Auto power LCD mode is not activated in

the following case.

– In playback mode [ ]

LCD Monitor

This is convenient as it allows you to take pictures from various angles by adjusting the LCD monitor when taking pictures with Live View.

∫Taking pictures at a normal angle

∫Taking pictures at a high angle

Take hold of the LCD monitor open knob A with your fingers, pull the knob towards you and rotate the monitor 180o.

A

•This is convenient when there is someone in front of you and you cannot get close to the subject.

∫Taking pictures at a low angle

Take hold of the LCD monitor open knob with your fingers, and pull the knob toward you and rotate the monitor 180o.

•This is convenient when taking pictures of flowers etc. that are in a low position.

LCD monitor rotation direction

1Maximum 180o

2 270o

57

VQT1G28