Panasonic DMC-L10K About the Battery, Detach the battery after charging is completed

Preparation

3 Detach the battery after charging is completed.

A

•Charging is completed when the [CHARGE] indicator A turns off (after about 140 minutes).

•Do not use any other AC cables except the supplied one.

•After charging is completed, be sure to disconnect the AC cable from the electrical outlet.

•The battery becomes warm after using it and during and after charging. The camera also becomes warm during use. This is not a malfunction.

•The battery will be exhausted if left for a long period of time after being charged. Recharge the battery when it is exhausted.

•The battery can be charged even if it is not fully discharged.

•Use the dedicated charger and battery.

•Use the charger indoors.

•Do not disassemble or modify the charger.

•The battery charger is in the standby condition when the AC cable is connected. The primary circuit is always “live” as long as the power cord is connected to an electrical outlet.

About the Battery

(charging/number of recordable

pictures)

∫Battery indication

The remaining battery power appears on the screen.

•The battery indication turns red and blinks. (The status indicator blinks when the LCD monitor turns off.) Recharge the battery or replace it with fully charged battery.

[This does not appear when using the AC adaptor. (P128)]

∫The battery life

The number of recordable pictures when using the Viewfinder

(By CIPA standard in program AE mode)

Number of	Approx. 450 pictures
recordable	(Approx. 225 min)
pictures

Recording conditions by CIPA standard

•Temperature: 23 oC (73.4 oF)/

Humidity: 50% when LCD monitor is on.¢

•Using a Panasonic SD Memory Card (128 MB).

•Using the supplied battery.

•Using the supplied lens.

•Starting recording 30 seconds after the camera is turned on. (When the optical image stabilizer function is set to [MODE1])

•Recording once every 30 seconds with full flash every second recording.

•Turn the camera off every 10 recordings. ¢ The number of recordable pictures

decreases in Auto power LCD mode or Power LCD mode. (P56)

•CIPA is an abbreviation of “Camera & Imaging Products Association”.

19

VQT1G28