Panasonic DMC-L10K USB Mode, Select on Connection, Highlight, Onoff, Video OUT

Preparation

[USB MODE]

Press [ MENU/SET ] to display the [SETUP] menu and select the item to set. (P26)

Select the USB communication system after or before connecting the camera to your PC or your printer with the USB connection cable (supplied). (P118, 120)

[ SELECT ON CONNECTION]:

Select either [PC] or [PictBridge (PTP)] if you connected the camera to a PC or a printer supporting PictBridge.

[ PC]:

Set after or before connecting to a PC.

[PictBridge (PTP)]:

Set after or before connecting to a printer supporting PictBridge.

•When [PC] is selected, the camera is connected via the “USB Mass Storage” communication system.

•When [PictBridge (PTP)] is selected, the camera is connected via the “PTP (Picture Transfer Protocol)” communication system.

30

[HIGHLIGHT]

Press [ MENU/SET ] to display the [SETUP] menu and select the item to set. (P26)

[OFF] No highlight display

[ON] When the auto review function is activated or when playing back, white saturated areas appear blinking in black and white.

[ON][OFF]

•If there are any white saturated areas, we recommend compensating the exposure towards negative (P44) referring to the histogram (P55) and then taking the picture again. It may result in a better quality picture.

•There may be white saturated areas if the distance between the camera and the subject is too close when taking pictures with the flash.

If [HIGHLIGHT] is set to [ON] in this case, the area directly illuminated by the photo flash will become white saturated and appear blinking in black and white on the LCD monitor.

[VIDEO OUT]

Press [ MENU/SET ] to display the [SETUP] menu and select the item to set. (P26)

Set to match the color television system in each country.

[NTSC]: Video output is set to NTSC system.

[PAL]: Video output is set to PAL system.

•Video output is available in playback mode only.

VQT1G28