Panasonic DMC-L10K Inserting/Removing the Battery, Remove the battery after use

Preparation

Inserting/Removing the Battery

•Check that the camera is turned off.

•Close the flash.

1 Slide the release lever in the direction of the arrow (OPEN side) and then open the battery door.

•Always use genuine Panasonic batteries (DMW-BLA13PP).

•If you use other batteries, we cannot guarantee the quality of this product.

2Insert:

Insert the charged battery fully until it clicks.

Remove:

Push the lever A in the direction of the arrow to remove.

A

•Be careful of the direction indicated by

the mark [] on the battery when inserting the battery.

31:

Close the battery door.

2:

Slide the release lever in the direction of the arrow (CLOSE side) and then close it firmly.

•Remove the battery after use.

•Do not remove the card or the battery while the card is being accessed. The data may be damaged. (P23)

•Do not remove the battery with the camera turned on since the settings on the camera may not be stored properly.

•The supplied battery is designed only for the camera. Do not use it with any other equipment.

21

VQT1G28