Panasonic DMC-L10K 140, Picture cannot be recorded with Live View, However a picture is not taken

Others

6:The recorded picture is blurred. The optical image stabilizer is not effective.

•The shutter speed will become slower and the optical image stabilizer function may not work properly when taking pictures especially in dark places. In this case, we recommend holding the camera firmly with both hands when taking pictures (P35, 54). We recommend using a tripod and the self-timer (P74) when taking pictures with a slow shutter speed.

7:The recorded picture looks rough. Noise appears on the picture.

•Is the ISO sensitivity high or the shutter speed slow?

–Decrease the ISO sensitivity. (P78)

–Set [NOISE RED.] in [FILM MODE] towards [_] or set every item except [NOISE RED.] towards [`]. (P92)

–Take pictures in bright places.

•Is [LONG SHTR NR] in the [REC] menu set to [OFF]? (P103)

8: The picture cannot be recorded with Live View.

•If you use Live View for a long period of time or where the temperature is high, the temperature of the image sensor will increase. A message may appear on the screen and Live View may become unusable. In this case, switch to using the viewfinder for taking pictures or turn the camera off for a short while.

9:A shutter sound is heard twice when taking pictures with Live View.

•If you press the shutter button fully, the shutter sound is heard twice and 1 picture is taken. The first shutter sound is heard when the shutter returns to the position before a picture is taken and the second shutter sound is heard when the picture is actually taken.

140

10:The shutter sound is heard once when taking pictures with Live View

however a picture is not taken.

•The shutter sound is heard in auto focus when the mirror goes down and then goes up after pressing the shutter button halfway to enable the camera to focus or when the shutter button is released immediately after pressing it fully. However a picture is not taken.

∫LCD monitor

1:A flickering vertical line appears on the LCD monitor under fluorescent light.

•The LCD monitor may flicker for a few seconds after turning the camera on indoors under fluorescent light.

This is not a malfunction. This does not affect the pictures you are recording.

2:The LCD monitor is too bright or dark.

•Adjust the brightness of the LCD monitor. (P29)

•Is the camera in Power LCD mode? (P56)

3:Black, red, blue and green dots appear on the LCD monitor.

•These pixels do not affect the recorded pictures.

This is not a malfunction. (P135)

4:Noise appears on the LCD monitor.

•In dark places, noise may appear to maintain the brightness of the LCD monitor.

This does not affect the pictures you are recording.

VQT1G28