Panasonic DMC-L10K operating instructions Using the MC Protector/PL Filter, 126

Others

•If you use commercially available external flashes with communication functions other than the dedicated one, they may not operate normally or they may be damaged. Do not use them.

•Even if the external flash is turned off, the camera may enter the external flash mode when the external flash is attached. When you are not using the external flash, detach it.

•When attaching the external flash, the built-in flash cannot be activated.

•Do not open the built-in flash when an external flash is attached.

•When attaching the external flash, the camera will become unstable.

•Detach the external flash when carrying the camera.

•When attaching the external flash, do not hold only the external flash because it may detach from the camera.

•If you use the external flash when the

white balance is set to [ ] (Flash) finely adjust the white balance depending on the

picture quality. (P77)

•If you take pictures close to the subject in Wide, the vignetting effect may appear on the bottom of the recorded picture.

•Read the operating instructions of the external flash for details.

126

Using the MC Protector/PL Filter

The MC protector is a transparent filter which affects neither the colors nor the amount of light, so it can always be used to protect the camera’s lens. Also, the PL filter reduces diffused light reflection so you can take pictures with increased contrast.

1 Detach the lens cap.

2 Attach the MC protector A or the PL filter B.

A

B

•You cannot attach the MC protector and the PL filter at the same time.

•If the MC protector/PL filter are tightened too much, you may not be able to remove them. Do not tighten them too much.

VQT1G28