Troubleshooting
Verification Stamp
The Verification Stamp contains ink. When the stamp mark appears faded or hard to see, the stamp should be replaced or refilled with ink.
To remove the stamp
1 |
2 |
3 |
4 |
Open the ADF unit.
Peel down the Scanning Pad slighty from the left side to expose the Stamp Assembly as illustrated.
1.Remove by pulling the Stamp Assembly upward.
2.Remove the Stamp. Replace the stamp with a new one or refill the stamp with a few drops of the specified ink into the back of the stamp.
Reinstall the Stamp Assembly.
Problem Solving
NOTE
1.Please contact your local Authorized Panasonic Dealer to purchase a new stamp. See page 51 of the Operating Instructions (For Copier) for order number.