Basic Transmission Settings

Original (Text/Photo)

The Original setting is useful when sending photographs or illustrations with gray tones. Your machine is preset to "TEXT". You can select either "TEXT/PHOTO" or "PHOTO" mode.

for text only originals

for text and photo originals

for photo or illustration originals

Verification Stamp

The Verification Stamp helps you to confirm successful transmissions by stamping the bottom of each successfully transmitted page with a small mark.

NOTE

1. When you select TEXT/PHOTO, or PHOTO, your machine will automatically select Fine

Resolution.

 

2.When you store a document in memory, the Verification Stamp will stamp on the document if it is successfully stored in memory. In this case the Verification Stamp is not a confirmation that the document was successfully transmitted. If you wish to disable the use of the Verification Stamp when storing document in memory, change the setting of Fax Parameter No. 28. (See page 30)

3.To change the preset Verification Stamp position, change the setting of Fax Parameter No. 04. (See page 29)

Basic Operations

35

Page 35
Image 35
Panasonic DP-1810F manual Basic Transmission Settings, Original Text/Photo, Verification Stamp