Receive To Memory
90
After receiving a document with the Receive To Memory feature, the following message will appear on the
display.
MESSAGE IN MEMORY
< RCV TO MEMORY >
To print the document, follow the steps below.
Make sure that the FAX/EMAIL lamp is ON. If not, press to select the "FAX/EMAIL" mode.
NOTE 1. If the password has not been set, your machine will not prompt you to enter the password.
The documents will be printed immediately after pressing in step 4.
2. Once the RCV TO MEMORY feature is set to "On", the password cannot be changed (Fax
Parameter No. 37 will not be s hown on the LCD display). If you wish t o change the password,
set RCV TO MEMORY feature to “Off” first. Then change the password. (See page 88)
Printing Out Documents
1
SELECT MODE (1-5)
ENTER NO. OR ∨∧
2
RCV TO MEMORY=ON
1:OFF 2:ON 3:PRINT
3RCV TO MEMORY=PRINT
1:OFF 2:ON 3:PRINT
4INPUT PASSWORD
❚❚❚❚
5Enter the password to print the documents.
(See Note 1)
Ex:
INPUT PASSWORD
1234
6
Machine will start to print the documents.
* PRINTING *
MEMORY RCV’D DOC
1234
SET