Panasonic DP-4520, DP-3520, DP-6020 appendix 110, Start

Pre Installation Information

For the total system to work properly via LAN, certain information and additional parameters must be set. Please contact your network administrator for the required information and connection to the LAN. Important: Make a copy of this page and ask the Network Administrator to complete the required information. After its returned, transfer the information to the back side of the front cover for future reference and troubleshooting.

User Information

Company Name

Address

Dept.
City	State	Zip Code
Tel. No.	Fax No.

Internet Parameters (See page 122)

(1) IP Address:

(2) Subnet Mask:

(3) Default Gateway IP Address:

(4) Primary DNS IP Address:

(5) Secondry DNS IP Address:

(6) Email Address:

(7) SMTP Server IP Name :		or	*SMTP Server IP Address:
(8) SMTP Auth Name :
(9) SMTP Auth Password :
(10)	POP Server Name:	or	*POP Server IP Address:
(11) POP User Name:
(12)	POP Password:
(13)	LDAP Server Name:	or	LDAP Server IP Address
(14)	LDAP User Name:
(15)	LDAP Password:
(16)	LDAP Search Base:
(17)	Host Name:
(18)	Default Subject:
(19)	Default Domain:
(20)	Selectable Domains:
1.			6.
2.			7.
3.			8.
4.			9.
5.	Remote Password:		10.
(21)
(22)	Relay XMT Password:
(23)	Manager’s Email Address:
(24)	Insert Email Text:
(25)	Relay Domains (Domains Authorized for Relay Transmission):
1.			6.
2.			7.
3.			8.
4.			9.
5.	Community Name (1):		10.
(26)
(27)	Community Name (2):
(28)	Device Name:
(29)	Device Location:

NOTE

1.Items in Bold, depict information obtained from you Network Administrator.

2.By default the machine requires the IP Address of the DNS Server and prompts you to enter the SMTP and POP Server Names (items 7 and 10 above).

If the DNS Server is not available, change the 27/26*(DNS server address) of General Settings

to "No" ( FUNCTION GENERAL SETTINGS 09/04*KeyKeyOperatorMode , Input ID

Code, OK 27/26* DNS Server Address .). Then the machine will prompt you to enter the IP Address of the SMTP and POP Servers.

3.If required, the MAC Address of your machine can be obtained from the 2nd page of the General Settings List printout, by pressing

FUNCTION GENERAL SETTINGS 09/04*KeyKeyOperatorMode , Input ID Code,

		OK	00/31*PrintPrintGeneneralSettings	Start	OK
				between the DP-2310/3010 and DP-3510/3520/4510/
	* Certain Parameter Numbers may differ
	4520/6010/6020 series. If you encounter two Parameter Numbers separated by a "/" and an
110	asterisk ("*"), the first number corresponds to (DP-2310/3010) and the second number
	corresponds to (DP-3510/3520/4510/4520/6010/6020).