Panasonic DP-3520, DP-6020, DP-4520 appendix 192, Setting Comments, Parameter, Invalid, Valid

Customizing Your Machine

Fax Parameter Table

* = Factory default setting

No.	Parameter	Setting		Comments
044	Password-Receive	*Off	Setting a 4-digit RCV-Password and selecting whether the machine
			performs	and checks the RCV-Password of the transmitting station
		On
			when receiving. (See page 79)
046	Select Receive	*Invalid	Selecting whether the machine performs selective reception.
			(See page 92)
		Valid
052	Diagnostic Password	(----)	Setting the password for Remote Diagnostic Mode. Please ask your
			Panasonic Authorized Dealer for details.
053	Sub Address Password	(----)	Setting a 20-digit password for secured sub-address communication.
054	Fax Forward	*Invalid	Selecting whether the machine performs Fax Forwarding to the
			specified destination.
		Valid
056	Cover Sheet	*Off	Setting the home position of the Cover Sheet parameter in the Select
			Mode. (See page 73)
		On
077	Department Code	*Invalid	Selecting whether the machine performs the Department Code
			operation. (See page 94)
		Valid
078	Rotation XMT	Invalid	Selecting whether the machine performs rotation transmission.
		*Valid
082	Quick Memory XMT	Invalid	Selecting whether the machine performs Quick Memory Transmission.
			Invalid	:Stores all documents into memory first before dialing the
		*Valid
				telephone number.
			Valid	:Starts dialing the telephone number immediately after storing
				the first page.
086	RINGER VOLUME	Off	Setting the home position of the ringer volume when your machine
			receives a call.
		* Soft
		Loud
089	List Output Tray	*Upper	Selecting the Output Tray home position for List printout.
			Upper :The List printout exits to the Upper Output Tray.
		Bottom
			Bottom :The List printout exits to the Bottom Output Tray.
			(DP-2310/3010 : "Inner 1", "Inner 2", "Outer")
095	Duplex Print	*Invalid	Selecting whether the machine performs duplex print when Letter/A4
			originals are received.
		Valid
097	Special Tray	*None	Select up to 4 Special Trays that will not be used for printing received
	No.1 - 4		faxes (4-Trays, plus LCT configuration). One Tray must always be
		Tray 1
	(DP-2310/3010: No.1 - 3)		available for receiving Faxes.
			(You can specify one Tray (1 ~ 4, LCT) for each selection No. 1, No. 2,
		Tray 2
			No 3 and/or No. 4)
		Tray 3	(DP-2310/3010: 4-Trays only)
		Tray 4
		LCT
099	Memory Size	-	Displays the amount of base and optional memory installed.
	(Flash Memory)		(Base Memory + Optional Memory)

192