Panasonic DP-6020, DP-3520, DP-4520 appendix 130, To send with reduction, follow the steps below

Sending Documents via LAN

Internet Fax Ledger Size Document Transmission

4	Make sure that the setting is			and press				.
			ON				OK
	Dial by any combination of the following methods:
	• Manual Email Addressing, press					after each station is entered. (Up to
					OK
	70 stations)
	• Address Book Email Addressing.
	(Up to 200 stations)
	Ex:
		PANASONIC
			Memory Transmit STN(s):001
			TO: PANASONIC
			abc@panasonic.com
			PANASONIC				QUALITY DEPT

5

The document(s) is stored into memory with a file number.

The machine then connects to the LAN and transmits the Ledger size document(s).

(After the document(s) are sent, the "Ledger Email Transmit" Select Mode will automatically return to the preset position (ON))

To send with reduction, follow the steps below.

Repeat steps 1 to 5, except in step 4, set the "Ledger Email Transmit" setting to "OFF" position.

When the Select Mode "Ledger Email Transmit" setting is set to the "OFF" position, the transmission reduction is according to the setting of Fax Parameter No. 141 (LAN XMT Reduction). (See the Table below)

Ledger Email Transmit = ON		: Transmits actual document size (without reduction).
Ledger Email Transmit = OFF		: Reduces LEDGER size document to B4 size or to A4/Letter
		before transmission. (According to the Fax Parameter No. 141
		(LAN XMT Reduction) setting, see Table below)
		Document Size Transmission
Document Size			Ledger Email Transmit = OFF
	Ledger Email Transmit = ON		Fax Parameter No. 141	Fax Parameter No. 141
			(LAN XMT Reduction)	(LAN XMT Reduction)
			set to "Invalid"	set to "Valid"
LEDGER		LEDGER	B4	A4/Letter
B4		B4	B4	A4/Letter
A4/Letter		A4/Letter	A4/Letter	A4/Letter

NOTE

1. Factory default setting for Fax Parameter No. 141 (LAN XMT Reduction) is "Invalid".

130