Panasonic DP-3520, DP-6020, DP-4520 appendix 228

Glossary

Power Saver Mode	To reduce the power consumption of the machine in standby, select the time period to turn
	OFF the high temperature fuser unit when the printer is idle.
Print Collation	The ability to stack received documents in the correct order.
Print Reduction Modes	The methods used to determine how an incoming document will be reduced to print onto the
	paper loaded in your machine.
Program Keys	Keys that are defined for storing a sequence of stations to be dialed or polled.
Protocol	A protocol is the special set of rules for communicating that the end points in a
	telecommunication connection use when they send signals back and forth. Both end points
	must recognize and observe the protocol.
PSTN	Public Switched Telephone Network. Network of interconnected switching equipment and
	transmission facilities.
Qwerty Keyboard	A keyboard on the Touch Panel Display that is used to enter letters and symbols for various
	programming functions.
Receiving Password	A 4-digit password that is checked before a document is received.
Relay Address	A 3-digit code that identifies your machine is programmed in a relay network.
Relay Network	A group of facsimile machines that communicate via a relay station.
Relay Station	A certain type of facsimile machine that can store and forward documents to an end receiving
	station and/or a relay station in another relay network.
	Your machine can not be used as a relay station.

Relay Transmission Report

Relayed Transmission

Resolution

Rotation XMT

Router (Gateway)

A report that contains information regarding the last document transmission to a relay station.

Sending a document to a relay station, which in turn, sends the document to the end receiving station.

Relates to the number of dots scanned or printed per certain square. The quality of the image increases as the number of dots per certain square increases.

The document is set as ( ), the image is rotated by 90º and then transmitted as ( ).

A special purpose computer (or software package) that handles the connection between 2 or more networks.

Gateways act like traffic cops, they spend their time looking at the destination addresses of the packets passing through them and deciding which route to send them on.

Selective Reception	A function that can be set so that your unit will receive from only those machines
	programmed into your dialer.
Sender Selection	The user can select one of 24 pre-programmed sender’s name and email address/telephone
	number before each transmission.
Server	A computer, or a software package, that provides a specific kind of service to client software
	running on other computers.
	A single server machine could have several different server software packages running on it,
	thus providing many different servers to clients on the network.

228