Panasonic KX-FPG371 manual To send the same document to more than one party only once

Sending Faxes

Sending the same document to pre-programmed parties

	{STOP}
{>}{+}{-}

{SET}

1 Insert the document FACE DOWN.

LIf necessary, press {+} or {-}repeatedly to select the desired resolution (page 55).

2 Press {>}.

DIRECTORY [+ -] <MAILBOX>)

3 Press {-}or {+} until the following is displayed.

<BROADCAST> SEND:PRESS SET

4 Press {SET}.

LThe document will be fed into the unit

and scanned into memory. The unit will then transmit the data to each entry, calling each number sequentially.

LAfter transmission, the stored document will be erased automatically, and the unit will automatically print a broadcast sending report.

Note:

LIf you select “FINE”, “SUPER FINE” or

“PHOTO” resolution, the number of pages that the unit can transmit will decrease.

LIf the document exceeds the memory capacity, sending will be canceled.

LIf one of the entries is busy or does not answer, it will be skipped. All skipped entries will be redialed up to 2 times after all of the other entries have been called.

To send the same document to more than one party only once

You can also select the parties for each transmission.

1.Insert the document.

2.Press {>}.

3.Press {-}or {+} until the following is displayed.

<ONE TIME BROAD> PRESS SET

4.Press {SET}to start programming the entries you want to transmit to.

DIR= [00]

NAVI.[+ -] & SET

5.Press {+} or {-}until the desired entry you want to transmit to is displayed.

Example: BILL

6543210

6. Press {SET}.

Example:	DIR=BILL	[01]
	SEND:PRESS SET

LTo program other entries, repeat steps 5 and 6 (up to 20 entries).

7.Press {SET} to start transmission to the programmed entries.

To cancel the broadcast setting

1.Press {STOP} while the unit displays the following.

BROADCASTING

LThe display will show the following.

SEND CANCELED?

YES:SET/NO:STOP

2.Press {SET}.

61