Panasonic KX-FPG371 Code #36 Receiving oversized documents, Code #42 Setting the message alert

Features Summary

Code #36: Receiving oversized documents

RCV REDUCTION

MODE=92% [±]

If the size of the document sent by the other party is as large as, or larger than the recording paper, the unit can reduce the document and print it. Select the desired reduction rate.

Setting	Recording	Original
	paper size	document
		size
100%	Legal	Letter, A4
	A4	Letter
92%	Letter	Letter
(default)
	Legal	Legal
	A4	A4
86%	Letter	A4
72%	Letter	Legal
	A4	Legal

Code #39: Changing the display contrast

LCD CONTRAST

MODE=NORMAL [±]

NORMAL (default): For normal contrast.

DARKER: Used when the display contrast is too light.

Code #41: Changing the fax activation code

FAX ACTIVATION

MODE=ON [±]

If you use an extension telephone and wish to use it to receive a fax, activate this feature and program the activation code.

1.Press {MENU}.

2.Press {#}, then {4}{1}.

3.Press {+} or {-}to select “ON”.

4.Press {SET}.

5.Enter your code from 2 to 4 digits, using 0– 9,

# and *.

LThe default code is “@#9”.

L Do not enter “0000”.

6.Press {SET}.

7.Press {MENU}.

Code #42: Setting the message alert

MESSAGE ALERT

MODE=OFF [±]

To alert you with beeps when a new voice message is recorded. If you hear slow beeps, listen to recorded messages. The beeps will stop.

ON: You will hear a beeping sound.

OFF (default): Deactivates this feature.

Code #43: Setting the recording time alert

REC. TIME ALERT

MODE=OFF [±]

To alert you with beeps when there is less than 60 seconds of remaining recording time. If you hear slow beeps, erase the recorded messages (page 75, 80). The beeps will stop.

ON: You will hear a beeping sound.

OFF (default): Deactivates this feature.

Code #44: Setting the memory reception alert

RECEIVE ALERT

MODE=ON [±]

To alert you with a beeping sound when a received fax document is stored into memory due to some existing problem.

If you are alerted by a slow beeping sound, clear the printing problem and make sure the unit is supplied with enough paper to print the stored document. The beeps will stop.

ON (default): You will hear a beeping sound.

OFF: Deactivates this feature.

Code #46: Setting the friendly reception

FRIENDLY RCV

MODE=ON [±]

To receive a fax automatically when you answer a call and hear a fax calling tone (slow beep).

ON (default): You do not have to press {FAX/START} for fax reception.

OFF: You have to press {FAX/START} for fax reception.

90

See page 87 for the programming method.