Panasonic KX-FPG371 manual Advanced features

Features Summary

Advanced features

Code #22: Setting the journal report to print automatically

AUTO JOURNAL

MODE=ON [±]

ON (default): The unit will print the journal report automatically after every 30 new fax communications (page 56).

OFF: The unit will not print the journal report, but keep records of the last 30 fax communications.

Code #23: Sending documents overseas

OVERSEAS MODE

MODE=ERROR [±]

10.Press {MENU}.

LTo cancel after programming, press {STOP} then {SET}.

LTurn on the auto answer setting.

Code #26: Setting the Caller ID list to print automatically

AUTO CALL. LIST

MODE=ON [±]

ON (default): The unit will print the Caller ID list automatically after every 30 new calls (page 49).

OFF: The unit will not print the Caller ID list, but keep records of the last 30 caller information.

If you have difficulty sending an overseas fax,		Code #31: Activating the Distinctive Ring
		feature
activate this feature before starting transmission.
This feature makes sending documents easier		DISTINCTIVE RING
as the transmission speed is slowed down.		MODE=OFF	[±]
L This feature is not available for broadcast		See page 66 for details.
transmission.
L The calling charge may be higher.
		Code #32: Setting the ring pattern for fax
NEXT FAX: This setting is effective only for the
		(Distinctive Ring feature)
next attempted fax transmission. After
transmission, the unit will return to the previous		FAX RING PATTERN
		RING=B-D	[±]
setting.
		See page 67 for details.
ERROR (default): When the previous fax
transmission fails and you wish to redial the
same number.		Code #34: Setting the quick scan
OFF: Deactivates this feature.
		QUICK SCAN	[±]
		MODE=OFF
Code #25: Sending a fax at a specific time		This feature is helpful when you want to remove
DELAYED SEND	[±]	the document for other uses, because the unit
MODE=OFF		will release the document before
This feature allows you to take advantage of low-		sending/copying.
		L If the document exceeds the memory
cost calling hours offered by your telephone
		capacity, sending of the whole document or
company. This feature can be set up to 24 hours
		copying of the exceeded document will be
in advance of the desired time.
		canceled and this feature will be turned off
To send a document:
		automatically.

1.Insert the document.

2.	Press {MENU}.	ON: The unit will scan the document and store it
		into memory first, then the unit will start
3.	Press {#}, then {2}{5}.
		sending/copying.
4.	Press {+} or {-}to select “ON”.	OFF (default): Deactivates this feature.
5.	Press {SET}.
6.	Enter the fax number.
7.	Press {SET}.
8.	Enter the transmission start time.
	L Press {*} to select “AM” or “PM”.

9.Press {SET}.

See page 87 for the programming method. 89