Panasonic KX-FPG371 manual Copying, Making a copy, Quick scan feature, To stop copying

Copying

Making a copy

Document guides

{COPY}

{>}{+}{-} {STOP}

{START}

1 Adjust the width of the document guides to the size of the document.

LConfirm that there is enough recording paper in the recording paper entrance.

2 Insert the document (up to 10 pages) FACE DOWN until a single beep is heard and the unit grasps the document.

STANDARD

PRESS NAVI.[+ -]

3 If necessary, press {+} or {-}repeatedly to select the desired resolution.

4 Press {COPY}.

NUMBER=1

COPY:PRESS START

b

NUMBER=1

OR PRESS NAVI. )

LIf necessary, enter the number of copies (up to 50).

5 Press {START}.

LThe unit will start copying.

LIf you do not press {START} for 15 seconds, the unit will start copying automatically.

Note:

LAny transmittable document can be copied (page 57).

To select the resolution

Select the desired resolution according to the type of document.

–“FINE”: For printed or typewritten originals with small printing.

–“SUPER FINE”: For originals with very small printing.

–“PHOTO”: For originals containing

photographs, shaded drawings, etc.

LIf you select “STANDARD”, copying will be done using “FINE” mode.

Quick scan feature

This feature is helpful when you want to copy the document, then remove it for other uses. To use this feature, activate feature #34 (page 89).

LThe document will be fed into the unit and scanned into memory. The unit will then print the data.

If the document exceeds the memory capacity, copying of the exceeded document will be canceled and this feature will be turned off automatically.

To stop copying

Press {STOP}.

68