Location and function of each part
Remote control unit
Front
1
2
3
4
5
6
7
8
9
j k
l
m
n o
p
q r s
1Remote control operation indicator lamp This LED flashes when any button is pressed. If it doesn’t, check the side Lock switch and the batteries.
2POWER STANDBY button ･････････ (pp. 37, 39) When the projector is operating, use this key to enter the Standby mode.
3POWER ON button ････････････････････ (p. 38) When the projector is in standby mode with the MAIN POWER switch of the projector at the
“ l ” side, this button switches the projector to projection mode.
4Input select (RGB1, RGB2,
5MENU button ･････････････････････ (pp. 51, 53) Use this button to return to the previous screen when the sub menu is displayed. If you hold it down for at least 3 seconds while the
6Arrow ▲▼◄►buttons ････････････ (pp. 53, 88) Use these buttons to select menu items, change settings, adjust levels, and to enter the “SECURITY” password.
ENTER button ････････････････････････ (p. 53) Press to activate a menu selection or to initiate a function.
7ON SCREEN button ･･･････････････････ (p. 48) This buttons toggles the display of the onscreen menus.
8TEST PATTERN button ････････････････ (p. 49) Use this button together with the arrow keys to display the internal test patterns.
9Numeric
jSTATUS button ･･･････････････････････ (p. 48) Press this button to display projector information. It can also be used to send information about the projector’s status via
kLIGHT button ･････････････････････････ (p. 49) Press this button to illuminate the remote control buttons. The backlight will be extinguished
10 seconds after the last key press.
