„ Adjust clock, „ Network config | Panasonic PT-DZ12000U specs

Adjust clock page

Click [Detailed set up], then [Adjust clock] to display the Adjust clock page.

Time zone selection

Button to update time zone setting

New date field

New time field

Button to update time and date settings

Note

•If the time becomes incorrect immediately after setting the correct time, then the battery needs to be changed. Contact the dealer where you bought the projector to have the battery changed.

Network config page

Click [Detailed set up], then [Network config] to display the Network config page.

Set this to ON to enable the DHCP client function.

Enter the IP address if DHCP server is not used.

Enter the net mask if DHCP server is not used.

Enter the gateway address if DHCP server is not used.

DNS server address (primary) field Available input characters: Numeric characters (0–9), period (.) (Example: 192.168.0.253)

DNS server address (secondary) field

Available input characters:

Numeric characters (0–9), period (.) (Example: 192.168.0.254)

Enter the port number here. Number 80 is normally used.

Enter the name of the projector here. Enter the host name here if it is required when the DHCP server is going to be used, for instance.

Button to update settings

Special Features

ENGLISH – 103

Image 103

Panasonic PT-DZ12000U, PT-D12000U manual „ Adjust clock, „ Network config

Contents

PT-DZ12000U Model number PT-D12000U/PT-DZ12000U Dear Panasonic Customer Contents Important Safety Notice Panasonic Getting StartedPage „ Do not place sets directly on top of each other „ Do not disassemble the lamp unit„ Do not place liquid containers on top of the projector „ Do not insert any foreign objects into the projector „ Do not place any heavy objects on top of the projector Precautions with regard to safety„ Use only the specified battery „ Always disconnect all cables before moving the projector English Level, set the Altitude MODE, described on page 78, to on Before UsingAccessories „ Do not place the projector on a vinyl sheet or carpet „ Lamp „ MaintenanceDisposal „ To view clear images Location and function of each part Remote control unit„ Front Lock button Remote control transmitter window„ Side „ Bottom „ Front Projector Main UnitLocation and function of each part „ Rear Connection Terminals p Controls „ ControlsSelf-diagnosis display ･･･････････ pp Light ON/OFF button „ Connection terminals Effective range of remote Control operation Using the remote control unitLoading batteries Using a wired remote Control Setting projector ID Number to remote controlUsing the remote control unit Examples of system expansion InstallationPanasonic When attaching an optional ceiling mount bracket ET-PKD100H Adjusting the feetInstallation geometry Installation Horizontal Keystone Projected range using geometric adjustmentVertical Keystone Vertical ARC Min Max Fixed Side View Top View For the screen aspect ratio of 43 Units m feet/inches For the screen aspect ratio of 169 Units m feet/inches ZFor the screen aspect ratio of 43 Units m feet/inches ET-D75LE1 2.0 169 Installation dimensions diagram Pin No Pin No SignalConnection Before starting connection Connection Example of connecting with Video devices Example of connecting with personal computers Module Module model Terminal Signal formats supported Installing the input module„ Types of the input modules optional Insert the input module „ Procedure of installationInstall the two screws Register the input signal Remove the slot cover Installation of optional input modules Connecting signals to the input module HD/SD-SDI input module optional Connecting the signal to the SD-SDI input moduleConnecting the signal to the HD/SD-SDI input module SD-SDI input module optional Dual link HD/SD-SDI input module optional Signal Pin Connecting signals to the DVI-D input moduleDVI-D input module optional How to remove Projection lens How to install Projection lens Projection Power indicator lampConnecting the power Cord Indicator Projector status Status Projection Powering up the projectorMaking adjustment Selection Press Power on Press Power Standby Powering off the projector „ Using the remote control How to adjust the lensHow to adjust the focus, zoom and shift Press to select an item and adjust it Moving the projection lens position to the home position Adjustment range after lens position optical shiftModel number PT-D12000U PT-DZ12000U Projection lens ZRelationship between lens orientation and screen focus Lens adjustment to compensate for uneven screen focusHow to adjust the lens „ About the focus balance Left Precautions for projector installation work Press Enter Registration of input signal dataRegistration of new data Displayed „ How to register into sub memory Clearing Registered Signals dataRegistration of input signal data Press Default „ On-screen indications „ How to erase sub memoryRestrictions Status function Using the Shutter FunctionSwitching the input signal On-screen display Function Displaying the internal Test pattern Automatic adjustmentUsing the FUNC1 button Turning on button Illumination Press Aspect on the remote control Basic operations using the remote controlChanging the picture Aspect ratio „ Picture pp On-screen menusIcon Main Menu item On-screen menus Resetting to the factory Default Using the menu screens Switching the picture mode Adjusting the pictureAdjusting Contrast Adjusting the color Temperature Adjusting BrightnessAdjusting Color Adjusting Tint System daylight view setting Gamma settingAdjusting the picture Press to select Sharpness settingNoise reduction setting Dynamic iris setting Settings as presettings ET-MD100SD4 To display pictures complying With the sRGB standardDisplay the Picture screen. p Press to select Picture Press to select Natural Press to select Color Press to select Shift Adjusting the positionShift adjustment „ For vertical up and down adjustment Press to switch Aspect Adjusting the aspect ratioPress to select Aspect Adjusting the position Adjusting the zoom ratioClock phase adjustment Adjusting the geometry Keystone Select Keystone or Curved in , and then press EnterCurved Digital cinema reality How to use Advanced MenuBlanking adjustment Press to switch Digital Cinema Reality Adjusting the clamp Position Adjusting the input Resolution How to use Advanced Menu Edge blending adjustment Press to select Frame Delay Frame delayPress to select Bright Inside Press Enter Press to select Raster Position Press to switch Frame DelayPress to adjust the position „ PT-D12000U Raster position Display Language Setting the Display LanguageChanging the display Language Press to select the desired language Press to select Color Matching Display Option settingsAdjusting color matching Press to switch Color Matching Press Menu Adjusting the color matching Using a colorimeterPress to select their values After all the data has been input RGB in Only RGB input Screen settingDisplay Option settings Large Screen Correction Press to switch DVI Press to switch AutoPress to select Auto Setup Press Enter Press to switch DVI Edid AUX DVI in Only when ET-MD77DV is installed Press to select Back Color On-Screen display settingFeatures Back Color Press to select Startup Logo Setting the startup logoPress to switch Back Color Press to switch Startup Logo Press to select Projector ID Projector setupSetting a projector ID Projector Setup Direction Installation SettingAltitude Mode Projector setup Lamp select Press to switch Lamp SelectPress to select Lamp Select Remote2 mode RS-232C settingLamp relay Press to select Status Cleaning the air filterPress to select AIR Filter Cleaning Status Press to switch Auto Power OFF Auto power offPress to switch Time Press to select Auto Power OFF Setting the date and time Setting FUNC1Save all user data Press to select Load ALL User Data Service passwordLoad all user data Initialize USER1, USER2, USER3 Using the P in P functionSetting the P in P function Press to select P in P Mode Type Main WindowSUB Window Frame Lock Pattern Displaying the internal test pattern„ Cycle of displayed internal test Patterns Press to select Test Setting the security Password Setting the securityDisplaying the security Screen Setting the text Changing the security PasswordChanging the text Press to select Control Panel or Remote Controller Control device setupSetting the security Press to select Control Device Setup Press Enter How to use network functionsInitial setting of network Function Network standby Press to select Network How to use network functionsNetwork control Network status LAN10/100 lamp yellow Network connections„ Name and function of network function parts LAN LINK/ACT lamp green „ Change Password Accessing from the Web browserPress OK to display the Projector status Monitor information button Detailed set up button„ Basic control Selection tabs Menu display Lens adjustment Test pattern display„ Detail control „ Projector status Failed Occurrence of trouble „ Error informationZWhen Failed has appeared for an item OK Normal operation „ E-mail setup English English „ Ping test „ Authentication set up Temperature Warning Setup Minimum Time „ Network config „ Adjust clock „ Firmware update Command Control details Using the PJLink protocolSupported commands „ PJLink security authorization Examples of connection Using the serial terminals„ Pin assignments and signal names „ Communication conditions Factory setting Signal level RS-422-compliant Pin Signal Description No. name„ For RS-422 Basic format Control commandsUsing the serial terminals Command Function of command Remarks ZFor RS-232C Cable specifications„ Connecting to a PC „ When multiple projectors are connected Names of terminals Open H Short L Using the Remote 2 terminalExample of a control panel layout Pin assignments and control Lamp Monitor Lamp Indicators Procedure of cleaning Cleaning and replacement of air filterProjector Filter to the filter cleaning unit Install the movable metal meshInstall the brush cover so that it „ Indication after 1 800 hours Replacement of lamp unitPrecautions on lamp unit replacement Timing of lamp unit replacement Lamp unit cover screw Procedure of lamp unit replacementUse a Phillips screwdriver to Lamp unit to be replaced until Installation procedure Power does not turn on Symptoms Check point Details Remedy Self-diagnosis display FF0 Model No PT-D12000U PT-DZ12000U Specifications RGB2 input Appendix Compatible Signals MAC21 Appendix List of P in P Outside dimensions Dimensions Index Wired remote control ･･････････････････････････ Trademark Acknowledgement Français „ Ne pas surcharger la prise du secteur Précautions de sécurité„ Ne pas retirer le capot ou le modifier „ Ne pas placer plusieurs kits les uns sur les autres „ Ne pas placer le projecteur sur des surfaces instables„ Ne jamais démonter la lampe „ Ne pas mettre d’objets étrangers dans le projecteur „ N’utiliser que le type de piles spécifié Mise en gardePrécautions de sécurité suite Ne pas placer d’objets lourds sur le projecteur „ Ne jamais réutiliser une lampe usagée Avant l’utilisation AccessoiresMise en garde concernant les déplacements du projecteur Mises en garde concernant la configuration Mise au rebut Remarques concernant l’utilisationRemarques concernant la sécurité „ Indication après 1 800 heures Remplacement de la lampePrécautions à prendre lors du remplacement de la lampe Intervalle de remplacement de la lampe Vis du couvercle de la lampe Procédure de remplacement de la lampe Tqbj S0608-2098C