Network connections, LAN10/100 lamp yellow | Panasonic PT-DZ12000U

Network connections

The projector is equipped with network functions, and web browser controls can be used to carry out the following operations from a computer.

•Projector settings and adjustments

•Projector status display

•Transmission of E-mail messages if there is a problem with the projector

Note

•A LAN cable is required to use the network function. A cross cable is required when connecting directly to a computer. Straight cables are used when connecting through a switch or router.

PC

Projector

LAN cable (straight)

LAN cable (straight)

•A Web browser is required to use this function. Make sure that a Web browser is available in the system.

•Use Microsoft Windows 98SE/Me/NT4.0/2000/XP/Vista for the OS of your personal computer.

•The Web browser should be Internet Explorer 6.0 or later or Netscape Communicator 7.0 or later.

•To use the E-mail function, communication with E-mail server must be established. Make sure that E-mail feature is available in your system.

•Use a straight insulated LAN cable which supports category 5 or above.

•The length of LAN cable must be 100 m or shorter.

Name and function of network function parts

LAN terminal (10BASE-T/100BASE-TX)

Connect LAN cable here.

LAN LINK/ACT lamp (green)

Special Features

IN	OUT
REMOTE 1		REMOTE 2 IN
	IN

RS-232C IN

R/PR G/Y

RS-422 IN SERIAL

B/PB

RS-422 OUT

LAN

This lights when a LAN cable is connected and flashes when signals are being received or sent.

OUT

VIDEO S-VIDEO IN

SYNC/HD RGB 1 IN

VD

RGB 2 IN

DVI-D IN

LAN10/100 lamp (yellow)

This lights when a 100BASE-TX connection is established.

Attention

•If the LAN terminal is touched by electrostatically charged hands (or body), failure may be caused by the discharge of static electricity.

Be careful not to touch metallic part of LAN terminal or LAN cable.

•Connect indoor equipment to the LAN.

ENGLISH – 93

Image 93

Panasonic PT-DZ12000U manual Network connections, „ Name and function of network function parts, LAN LINK/ACT lamp green

Contents

PT-DZ12000U Model number PT-D12000U/PT-DZ12000U Dear Panasonic Customer Contents Important Safety Notice Panasonic Getting StartedPage „ Do not place liquid containers on top of the projector „ Do not disassemble the lamp unit„ Do not insert any foreign objects into the projector „ Do not place sets directly on top of each other „ Use only the specified battery Precautions with regard to safety„ Always disconnect all cables before moving the projector „ Do not place any heavy objects on top of the projector English Accessories Before Using„ Do not place the projector on a vinyl sheet or carpet Level, set the Altitude MODE, described on page 78, to on Disposal „ Maintenance„ To view clear images „ Lamp Remote control unit Location and function of each part„ Front „ Side Remote control transmitter window„ Bottom Lock button Location and function of each part Projector Main Unit„ Rear „ Front „ Controls Connection Terminals p ControlsSelf-diagnosis display ･･･････････ pp Light ON/OFF button „ Connection terminals Using the remote control unit Effective range of remote Control operationLoading batteries Setting projector ID Number to remote control Using a wired remote ControlUsing the remote control unit Installation Examples of system expansionPanasonic Installation geometry Adjusting the feetInstallation When attaching an optional ceiling mount bracket ET-PKD100H Vertical Keystone Projected range using geometric adjustmentVertical ARC Horizontal Keystone Min Max Fixed Side View Top View For the screen aspect ratio of 43 Units m feet/inches For the screen aspect ratio of 169 Units m feet/inches ZFor the screen aspect ratio of 43 Units m feet/inches ET-D75LE1 2.0 169 Installation dimensions diagram Connection Pin No SignalBefore starting connection Pin No Connection Example of connecting with Video devices Example of connecting with personal computers Installing the input module Module Module model Terminal Signal formats supported„ Types of the input modules optional Install the two screws Register the input signal „ Procedure of installationRemove the slot cover Insert the input module Installation of optional input modules Connecting signals to the input module Connecting the signal to the HD/SD-SDI input module Connecting the signal to the SD-SDI input moduleSD-SDI input module optional HD/SD-SDI input module optional Dual link HD/SD-SDI input module optional Connecting signals to the DVI-D input module Signal PinDVI-D input module optional How to remove Projection lens How to install Projection lens Connecting the power Cord Power indicator lampIndicator Projector status Status Projection Making adjustment Selection Powering up the projectorPress Power on Projection Press Power Standby Powering off the projector How to adjust the focus, zoom and shift How to adjust the lensPress to select an item and adjust it „ Using the remote control Adjustment range after lens position optical shift Moving the projection lens position to the home positionModel number PT-D12000U PT-DZ12000U Projection lens How to adjust the lens Lens adjustment to compensate for uneven screen focus„ About the focus balance ZRelationship between lens orientation and screen focus Left Precautions for projector installation work Registration of new data Registration of input signal dataDisplayed Press Enter Registration of input signal data Clearing Registered Signals dataPress Default „ How to register into sub memory „ How to erase sub memory „ On-screen indicationsRestrictions Switching the input signal Using the Shutter FunctionOn-screen display Function Status function Using the FUNC1 button Automatic adjustmentTurning on button Illumination Displaying the internal Test pattern Basic operations using the remote control Press Aspect on the remote controlChanging the picture Aspect ratio On-screen menus „ Picture ppIcon Main Menu item On-screen menus Resetting to the factory Default Using the menu screens Adjusting the picture Switching the picture modeAdjusting Contrast Adjusting Color Adjusting BrightnessAdjusting Tint Adjusting the color Temperature Gamma setting System daylight view settingAdjusting the picture Noise reduction setting Sharpness settingDynamic iris setting Press to select Settings as presettings Display the Picture screen. p Press to select Picture To display pictures complying With the sRGB standardPress to select Natural Press to select Color ET-MD100SD4 Shift adjustment Adjusting the position„ For vertical up and down adjustment Press to select Shift Adjusting the aspect ratio Press to switch AspectPress to select Aspect Clock phase adjustment Adjusting the zoom ratioAdjusting the geometry Adjusting the position Select Keystone or Curved in , and then press Enter KeystoneCurved Blanking adjustment How to use Advanced MenuPress to switch Digital Cinema Reality Digital cinema reality Adjusting the clamp Position Adjusting the input Resolution How to use Advanced Menu Edge blending adjustment Frame delay Press to select Frame DelayPress to select Bright Inside Press Enter Press to adjust the position „ PT-D12000U Press to switch Frame DelayRaster position Press to select Raster Position Changing the display Language Setting the Display LanguagePress to select the desired language Display Language Adjusting color matching Display Option settingsPress to switch Color Matching Press to select Color Matching Press to select their values Adjusting the color matching Using a colorimeterAfter all the data has been input Press Menu Display Option settings Screen settingLarge Screen Correction RGB in Only RGB input Press to select Auto Setup Press Enter Press to switch AutoPress to switch DVI Edid Press to switch DVI AUX DVI in Only when ET-MD77DV is installed Features On-Screen display settingBack Color Press to select Back Color Press to switch Back Color Setting the startup logoPress to switch Startup Logo Press to select Startup Logo Setting a projector ID Projector setupProjector Setup Press to select Projector ID Altitude Mode Installation SettingProjector setup Direction Press to switch Lamp Select Lamp selectPress to select Lamp Select RS-232C setting Remote2 modeLamp relay Press to select AIR Filter Cleaning Cleaning the air filterStatus Press to select Status Press to switch Time Auto power offPress to select Auto Power OFF Press to switch Auto Power OFF Setting FUNC1 Setting the date and timeSave all user data Load all user data Service passwordInitialize Press to select Load ALL User Data Setting the P in P function Using the P in P functionPress to select P in P Mode USER1, USER2, USER3 SUB Window Main WindowFrame Lock Type „ Cycle of displayed internal test Patterns Displaying the internal test patternPress to select Test Pattern Setting the security Setting the security PasswordDisplaying the security Screen Changing the security Password Setting the textChanging the text Setting the security Control device setupPress to select Control Device Setup Press to select Control Panel or Remote Controller Initial setting of network Function How to use network functionsNetwork standby Press Enter Network control How to use network functionsNetwork status Press to select Network „ Name and function of network function parts Network connectionsLAN LINK/ACT lamp green LAN10/100 lamp yellow Accessing from the Web browser „ Change PasswordPress OK to display the Projector status „ Basic control Detailed set up buttonSelection tabs Monitor information button „ Detail control Lens adjustment Test pattern display„ Projector status Menu display ZWhen Failed has appeared for an item „ Error informationOK Normal operation Failed Occurrence of trouble „ E-mail setup English English „ Ping test „ Authentication set up Temperature Warning Setup Minimum Time „ Network config „ Adjust clock „ Firmware update Supported commands Using the PJLink protocol„ PJLink security authorization Command Control details „ Pin assignments and signal names Using the serial terminals„ Communication conditions Factory setting Examples of connection Pin Signal Description No. name Signal level RS-422-compliant„ For RS-422 Using the serial terminals Control commandsCommand Function of command Remarks Basic format „ Connecting to a PC Cable specifications„ When multiple projectors are connected ZFor RS-232C Example of a control panel layout Using the Remote 2 terminalPin assignments and control Names of terminals Open H Short L Lamp Monitor Lamp Indicators Cleaning and replacement of air filter Procedure of cleaningProjector Install the movable metal mesh Filter to the filter cleaning unitInstall the brush cover so that it Precautions on lamp unit replacement Replacement of lamp unitTiming of lamp unit replacement „ Indication after 1 800 hours Use a Phillips screwdriver to Procedure of lamp unit replacementLamp unit to be replaced until Lamp unit cover screw Installation procedure Power does not turn on Symptoms Check point Details Remedy Self-diagnosis display FF0 Model No PT-D12000U PT-DZ12000U Specifications RGB2 input Appendix Compatible Signals MAC21 Appendix List of P in P Outside dimensions Dimensions Index Wired remote control ･･････････････････････････ Trademark Acknowledgement Français Précautions de sécurité „ Ne pas surcharger la prise du secteur„ Ne pas retirer le capot ou le modifier „ Ne jamais démonter la lampe „ Ne pas placer le projecteur sur des surfaces instables„ Ne pas mettre d’objets étrangers dans le projecteur „ Ne pas placer plusieurs kits les uns sur les autres Précautions de sécurité suite Mise en gardeNe pas placer d’objets lourds sur le projecteur „ N’utiliser que le type de piles spécifié „ Ne jamais réutiliser une lampe usagée Mise en garde concernant les déplacements du projecteur AccessoiresMises en garde concernant la configuration Avant l’utilisation Remarques concernant l’utilisation Mise au rebutRemarques concernant la sécurité Précautions à prendre lors du remplacement de la lampe Remplacement de la lampeIntervalle de remplacement de la lampe „ Indication après 1 800 heures Vis du couvercle de la lampe Procédure de remplacement de la lampe Tqbj S0608-2098C