●Dynamic Recording
This item lets you select the cameras for dynamic recording mode in
If five or more cameras are connected to the video multi- plexer, the channels selected for dynamic recording are recorded with priority.
1.Move the cursor to DYNAMIC REC SETUP by pressing the C or D button and then press the [HOME/SET] but- ton.
The DYNAMIC REC SETUP menu as shown in the figure appears on the monitor screen.
| DYNAMIC REC SETUP |
| |||
CAM PRIORITY | CAM PRIORITY | ||||
1CH |
| OFF |
| 9CH | OFF |
2CH |
| OFF | 10CH | OFF | |
3CH |
| OFF | 11CH | OFF | |
4CH |
| OFF | 12CH | OFF | |
5CH |
| OFF | 13CH | OFF | |
6CH |
| OFF | 14CH | OFF | |
7CH |
| OFF | 15CH | OFF | |
8CH |
| OFF | 16CH | OFF | |
2.Move the cursor to the PRIORITY column to be record- ed with dynamic recording for the camera number by pressing the C, D, A, or B buttons.
3.Select either ON or OFF by pressing the - or + but- ton.
OFF: Disables recording images with priority.
ON: Enables recording images preferentially over other input images.
The factory default settings are OFF.
4.Repeat steps 2 and 3 above to set other cameras.
Note: It is recommended to select up to 2 cameras.
5.When satisfied with all of the above steps, press the [SET UP/ESC] button to execute the selection and return to the previous REC OUTPUT SETUP menu.
Note: Recording is not enabled in dynamic recording mode when EXT4 is selected for MODE 9 in the REC MODE SETUP menu.
●Recording Mode Setup
This item lets you select a recording mode on the time lapse VCR.
1.Move the cursor to REC MODE SETUP by pressing the C or D button and then press the [HOME/SET] button. The REC MODE SETUP menu as shown in the figure appears on the monitor screen.
Current REC MODE
|
| REC MODE SETUP | ||
MODE |
|
|
| 0123456789 |
0 |
|
| ||
|
|
|
| ABCDEFGHIJK |
MODE0 | 1 | REAL | LMNOPQRSTUV | |
MODE1 | WXYZ | |||
MODE2 | abcdefghijk | |||
MODE3 | lmnopqrstuv | |||
MODE4 | wxyz | |||
MODE5 | ' ¤=?'"#&()* | |||
MODE6 | ||||
MODE7 |
| |||
MODE8 |
| |||
MODE9 EXT1 |
| |||
REC MODE Title
REC MODE Parameter
2.Move the cursor to the MODE parameter in the menu by pressing the C or D button.
3.Select a mode number by pressing the - or + button.
MODE 0: Normal recording mode
MODE 1 - 8: Time Lapse Mode (VCR without camera switching pulse)
MODE 9: Time Lapse Mode (VCR with camera switch- ing pulse)
The factory default setting is “0”.
Note: To select MODE 1 - 8, you must first complete the settings described below.
Recording Mode Setting Details
You can assign the camera switching timing to any one of MODE1 to MODE8 when using the VCR without camera switching pulse.
1.Move the cursor to the desired MODE number to be assigned by pressing the C or D button.
2.Press the [HOME/SET] button to move the cursor to the right in the switching timing column.
Note: The cursor does not move to this column when MODE 0 is selected in this table.
The value is fixed to 1 in this column.
33
