●Pan/Tilt Control (Preset Operation)
The following function requires the use of cameras equipped with the specific feature.
Note: Select only preset position numbers 1 to 16.
1.Select the desired monitor and camera referring to the Camera Selection procedure described above.
2.Press the
PRE-POSI
3.Select the preset position number by pressing the [1 – 16] button to move the pan/tilt head to the preset posi- tion on the active monitor.
Note: Select a number from 1 through 16. (“17” is not allowed.)
●Pan/Tilt Control (Home Position)
The following function requires the use of cameras equipped with the specific feature.
1.Select the desired monitor and camera referring to the Camera Selection procedure described above.
2.Press the [HOME/SET] button to move the camera to the home position on the active monitor.
UP
LEFT HOME/SET RIGHT
DOWN
●Pan/Tilt Control (Auto Panning )
The following function requires the use of cameras equipped with the specific feature.
1.Select the desired monitor and camera referring to the Camera Selection procedure described above.
2.Press the [AUTO] button to activate the auto panning function.
AUTO
3.To cancel the auto panning function, press one of the Direction buttons.
Note: When using the combination cameras with auto panning feature, make sure that the LOCAL/ REMOTE setting is set to LOCAL at the camera site. If REMOTE is selected, the panning movement is retained for only one minute.
●Camera Setup
The following function requires the use of cameras equipped with the specific feature.
1.Select the desired monitor and camera referring to the Camera Selection procedure described above.
2.Press the [SET UP/ESC] button, while holding down the selected [CAMERA] button, to gain access to the cam- era setup menu on the active monitor.
** CAM SET UP **
CAMERA ID |
| OFF |
| ↵ | ||||||||||
ALC/ELC |
|
|
| ALC |
| ↵ | ||||||||
SHUTTER |
|
|
|
|
|
|
|
| ||||||
AGC |
|
|
|
| ON |
|
|
|
|
| ||||
SENS UP |
|
|
| OFF |
|
|
|
|
| |||||
SYNC |
|
|
|
| INT |
|
|
|
|
| ||||
WHITE BAL |
| AWC | ↵ | |||||||||||
MOTION DET |
| ON | ↵ | |||||||||||
LENS DRIVE |
| DC |
|
|
|
|
| |||||||
| END |
| SET UP DISABLE | |||||||||||
|
| CAMERA/PRESET | POSITION |
|
| |||||||||
1 |
| 2 |
| 3 |
|
| 4 |
|
|
| SET UP/ESC | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5 |
| 6 |
| 7 |
| 8 |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| ||
9 |
| 10 |
| 11 |
| 12 |
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| ||
13 |
| 14 |
| 15 |
| 16 |
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3.Select the desired item by pressing the D or C button, and then select the desired mode by pressing the A or B button.
UP
LEFT HOME/SET RIGHT
DOWN
4.Press the [HOME/SET] button to execute the setting or enter a submenu.
5.Press the A and B buttons simultaneously to reset the selected menu.
6.Press the [SET UP/ESC] button to execute the setting and returns to the previous setup menu.
57
