7.Press the [SET UP/ESC] button, while holding the [FUNCTION] button, to exit from the setup mode or menu.
FUNCTION | SET UP/ESC | ||||
|
|
|
|
|
|
|
|
|
|
|
|
Note: Refer to the operating instructions of the selected camera for further details.
Caution: Camera addresses are important for
•Do not use addresses other than 1 through 16 for individual cameras. (“17” is not allowed)
•Do not set a single address for more than one camera in an
•Simplified preset position setting
The preset position can be set by a simplified proce- dure.
The following function requires the use of cameras equipped with the specific feature.
1.Press the [FUNCTION] button while the position set- ting menu is displayed on the active monitor.
2.Press the Direction buttons to move the pan/tilt head in the desired direction.
3.Press the [FOCUS] or [ZOOM] button to adjust the lens to achieve the desired image.
4.Press the [FUNCTION] button again to restore the Direction buttons’ cursor control function.
58
