3.Select the desired switching timing indicated as the field interval (4 to 999) by pressing the A or B button.
Notes:
•Numbers can also be input directly with the Camera Number buttons (1 - 10).
•Refer to the operating instructions of the VCR for switching timing.
When MODE9 is selected in this table, select EXT1 or EXT4 by pressing the A or B button.
EXT1: Enables spot image recording on the VCR.
EXT4: Enables quad images recording on the VCR.
4.Press the [HOME/SET] button to move the cursor to the right in the recording mode title column.
The square cursor appears in the character table.
5.To select a character, move the cursor on the desired character in the table by pressing the C, D, A, or B buttons.
6.Press the [HOME/SET] button to pick up the character and place it in the title column.
7.Repeat steps 5 and 6 above to edit the title.
8.If a wrong character is selected, press the - or + button to move the cursor in the title column.
Note: Press the + button to move the cursor to the right, or press the - button to move the cursor to the left.
Then press the [HOME/SET] button to overwrite the character with the character selected from the table.
9.Press the [SET UP/ESC] button. The cursor moves to MODE number.
10.Repeat steps 1 to 9 above to assign the other MODE numbers.
11.After completing the setting, press the [SET UP/ESC] button to return to the REC OUTPUT SETUP menu.
12.After finishing the setting, press the [SET UP/ESC] but- ton to return to the previous SETUP MENU.
■Multiscreen 2 Output Setup
These items let you select the display mode when connect- ing the Record Output (REC OUT) to the monitor for multi- screen 2 monitor.
ALARM SETUP *
MULTI OUTPUT SETUP *
SPOT OUTPUT SETUP *
REC/MULTI2 | MULTI2 OUTPUT * | |
SYSTEM SETUP * |
| |
CAM DOWNLOAD | NO | |
CAM | UPLOAD | NO |
ALL | RESET SELECT * | |
1.Move the cursor to the REC/MULTI2 parameter in the
SETUP MENU.
2.Select MULTI2 OUTPUT and then press the [HOME/SET] button.
The MULTI2 OUTPUT SETUP menu as shown in the fig- ure appears on the monitor screen.
MULTI2 OUTPUT SETUP
DISPLAY POSITION *
SEQUENCE MODE SEQ2
34
