Panasonic WJ-FS616C manual Preface, Features

PREFACE

The WJ-FS616C Video Multiplexer is designed to multiplex the field signals from video cameras and record the camera images on a time lapse VCR.

Up to 16 cameras can be connected to the unit for monitor- ing images in multiscreen, sequence, freeze or electronic zoom mode on a video monitor screen.

The WJ-FS616C Video Multiplexer allows you to control camera functions such as lens focussing, zooming, and iris, positioning of the pan/tilt head, etc. This makes the system highly flexible and sophisticated, and allows expansion to up to 64 cameras.

FEATURES

•The images of any connected camera can be displayed on full screen or on a 4, 7, 9, 10, 13 and 16 multiscreen as shown below.

4-SEGMENT 7-SEGMENT		9-SEGMENT	10-SEGMENT		13-SEGMENT 16-SEGMENT
SCREEN	SCREEN	SCREEN		SCREEN		SCREEN	SCREEN

(7, 10 and 13 multiscreens are not available for play- back images.)

In addition, one playback image can be displayed with camera images in 4, 7, 10 and 13 multiscreens.

•The pattern of a spot sequence consisting of up to 32 steps can be programmed by presetting the channel order and individual dwell time.

The pattern of a 4, 7, 9, 10, 13, or 16 multiscreen sequence consisting of up to 5 steps can be pro- grammed as shown below.

•Electronic zoom and freeze image functions are avail- able. The zoom area can be selected with the direction buttons.

•Up to 16 camera images multiplexed by the field rate are available at the REC OUT connector for recording on the time lapse VCR. Alarm priority recording is sup- ported.

•Camera functions such as pan/tilt, lens zoom, focus and iris, and camera setup can be controlled via a coaxial cable or RS-485 interface.

•The WJ-FS616C has a versatile alarm mode to optimize its multiscreen output, spot output, and record output.

•REC, PLAY, REW, FF, etc. can be controlled from the front panel of the video multiplexer, via the RS-232C interface or the wired remote control terminal of the Panasonic Time Lapse VCR.

•The WJ-FS616C can be controlled from a PC or the WV- CU550C and WV-CU360C System Controller via RS- 232C or RS-485 interface.

2 sec 5 sec 4 sec 3 sec 1 sec

5