Paradyne 9123 manual Device Messages 1 What It Indicates What To Do, Dlci

Operation and Maintenance

Device Messages

These messages appear in the messages area at the bottom of the screens.

All device messages are listed in alphabetical order.

Table 5-5. Device Messages (1 of 5)

Message	What It Indicates	What To Do
Access level is n ,	User's access level is 2	No action is needed.
Read-only.	or 3; user is not authorized
	to change configurations.
Already Active	Test selected is already	H Allow test to continue.
	running.	H Select another test.
		H Stop the test.
Blank Entries	New had been selected	H No action is needed.
Removed	from the Administer Logins	H Reenter the Login ID,
	screen, no entry was made,
		Password, and Access Level.
	then Save was selected.
Cannot delete Trap	Del ete was selected from	No action needed, or configure
Manager	the Management PVCs	another path for traps and try
	Options screen, but the	again.
	PVC had been defined as a
	trap destination.
Cannot Save ± no	Security was being set up,	Set up at least one login with
Level 1 Login IDs	but all the logins were	Access Level-1 so the unit can
	assigned either Level-2 or	be configured.
	Level-3 access.
Command Complete	Configuration has been	No action is needed.
	saved or all tests have
	been aborted.
Connection Refused	Two menu-driven user	Wait and try again.
(Seen at an FTP	interface sessions are
	already in use when a
terminal.)
	Telnet session was
	attempted.
Destination Not	Destination entered is	Enter another destination
Unique	already being used.	indicator.
DLCI in connection.	User tried to delete a DLCI	H No action needed, or
Delete connection first	that was part of a	H Delete the connection, then
	connection.
		delete the DLCI.
DLCI Number Already	The DLCI number entered	Enter another DLCI number.
Exists	on the DLCI Record Entry
	screen has already been
	created so is not unique.
DLCI Number	User tried to designate a	No action is needed.
Reserved	special troubleshooting
	DLCI.

9123-A2-GB20-00 May 2000 5-7