Paradyne 9123 manual If the selection is Unit is configured to operate, Default

Configuration

If the selection is . . .	The unit is configured to operate in . . .
Leased Line	Leased-line mode, for connection to a standard leased-line
	service. This mode provides a simple and straight-forward
	screen to guide the installer during initial installation, and to set
	up remote access to the unit.
	When operating in leased-line mode, no frame relay-related
	statuses, performance statistics, tests, configuration options, or
	control features are available; only physical layer functions are
	available.
	NOTE: If previously set to Frame Relay, then changed to
	Leased Line, all frame relay-related screens and
	features are filtered so they are transparent to the
	user. All frame relay links, DLCIs. and PVCs are
	preserved.
	In the case of time slots, all Frame Relay
	Network 1 FrameRly1 time slot assignments are
	converted to S1Port-1 on the Sync Data Port
	Assignments screen.
Frame Relay	Frame Relay-aware mode, for connection to a frame relay
(default)	service. This is the default operational mode, and it is used to
	configure the FrameSaver unit in frame relay mode so that
	frame relay parameters and SLV functionality can be set up.
	When operating in frame relay mode, all frame relay-related
	statuses, performance statistics, tests, configuration options,
	and control features are available.
	NOTE: If previously set to Leased Line, then changed to
	Frame Relay, Time Slot Discovery is temporarily
	suspended until LMI communication is
	reestablished, and all frame relay-related
	configuration options previously set up are
	restored, except for the Sync Data Port
	Assignments. In this case, all port assignments
	set to S1Port-1 are converted to FrameRly1
	assignments on the Frame Relay Network 1
	Assignment timeslot assignment screen.

To see how the FrameSaver unit's menu structure differs based upon the Service Type setting, see Appendix A, Menu Hierarchy.

The Service Type setting can be changed on demand. When Service Type is changed, the Changing ªService Typeº will effect overall device operation. Are You Sure? prompt appears. If you select No, no changes are made. If you select Yes, the edit copy of the system options is updated to reflect the changed mode. A Save is required to apply option updates to the current configuration.

See the FrameSaver FLEX 9123 Installation Instructions for additional information and installation procedures. See Product-Related Documents in About This Guide for its document number.

9123-A2-GB20-00 May 2000 3-9