Paradyne 9123 NetScout Indexes to the Interface Table ifTable, Rmon Logical Layer, For the DTE

SNMP MIBs and Traps, and RMON Alarm Defaults

NetScout Indexes to the Interface Table (ifTable)

For remote monitoring at sites where FrameSaver units are operating with

NetScout Probes, use the following ifName, ifDescr, and ifIndex.

Table B-2. NetScout Interface Objects Information

ifName	Description	ifDescr (ifEntry 2)	ifIndex
Frame Relay Logical Layer
Frame Relay 1	Frame relay logical	For the DTE side:	1
Network	link on the network	RMON (IN/OUT); Network T1
	interface	of FR DTE; T1 FR NAM;
		Hardware Version: hhhh-hhh
		For the DCE side:
		RMON (IN/OUT); Network T1
		of FR SERVICE; T1 FR NAM;
		Hardware Version: hhhh-hhh
Frame Relay 3	Synchronous Data	For the user side:	3
Sync Data	Port-1	RMON (IN/OUT); Synchronous
Port 1		Data Port of FR DTE, Slot: 1,
		Port: 1; T1 FR NAM; Hardware
		Version: hhhh-hhh
		For the network side:
		RMON (IN/OUT); Synchronous
		Data Port of FR SERVICE,
		Slot: 1, Port: 1; T1 FR NAM;
		Hardware Version: hhhh-hhh
RMON Logical Layer
RMON Frame	These values are	IN ± RMON (IN); [ifName of the	17±48
Relay Logical	calculated.	interface]
Interfaces	H For the DTE:
	(ifIndex ±1) * 2 +17	OUT ± RMON (OUT);
	H For the DCE: DTE	[ifName of the interface]
	calculated value +1
RMON Virtual	These values are	ALL ± VIRTUAL PVC	65±512
Interfaces	calculated based on	[interface number ]
	the probe's internal	[DLCI number ] ALL
	circuit index: circuit
	index +65.
RMON Virtual	These values are	IN ± VIRTUAL PVC	513±1023
Logical	calculated.	[interface number ]
Interfaces	H For the DTE:	[DLCI number ] DTE
	(virtual interface
	ifIndex ±65) * 2
		OUT ± VIRTUAL PVC
	+513
	H For the DCE:	[interface number ]
		[DLCI number ] DCE
	DTE calculated
	value +1

9123-A2-GB20-00 May 2000 B-5