Paradyne 9123 manual Main Menu → Status → Trap Event Log, Trap Event Log Screen Example

Operation and Maintenance

Trap Event Log

The Trap Event Log displays all traps stored in the SNMP trap event log. The following log example describes the alarm conditions that will generate an SNMP trap for a physical interface, and for the frame relay LMIs and DLCIs. These alarm conditions also generate Health and Status messages seen on the System and Test Status screen.

Main Menu → Status → Trap Event Log

Trap Event Log Screen Example

main/status/event_log				9123-C-SLV
Device Name: Node A				3/26/2000 23:32
		TRAP EVENT LOG
				Total Trap Events: 535
Time Elapsed
_Since Event_			_Event________________________________________
0d	23:59:59	Change in Frames Discarded due to Inbound Resource Errors on Sync
		Data Port S01P1 frame relay link ªPort-1º exceeded threshold of 1
		by 105.
2d	23:59:59	Change in Total LMI Errors on Network T1 frame relay link
		ªNet1-FR1º exceeded threshold of 1 by 59.
6d	23:59:59	DLCI 101 of Sync Data Port S01P1 frame relay link ªPort-1º up.
10d	23:59:59	DLCI 101 of Sync Data Port S01P1 frame relay link ªPort-1º down.
20d	23:59:59	Primary clock failed.
56d	23:59:59	Sync Data Port S01P1 frame relay link ªPort-1º LMI down.
64d	23:59:59	Network T1 frame relay link ªNet1-FR1º LMI down.
122d	23:59:59	Network T1 down.
364d	23:59:59	Unit reset.

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

ESC for previous menu	MainMenu Exit
Refresh PgUp PgDn

Up to 12 trap events can be displayed on a screen, the most current first. Page down (PgDn) to view less current trap events. When no trap events have been logged, No Events in Log. appears in the Event column.

ASCII trap strings used to describe trap events are provided in the tables contained in Standards Compliance for SNMP Traps. See Appendix B, SNMP MIBs and Traps, and RMON Alarm Defaults.

9123-A2-GB20-00 May 2000 5-39