Paradyne 9123 manual Dlci Alarm Defaults ± NetScout Area

SNMP MIBs and Traps, and RMON Alarm Defaults

DLCI Alarm Defaults ± NetScout Area

These alarms can be created during RMON initialization or when a DLCI is created. They are put into the NetScout alarm area.

HTable B-12 identifies alarm defaults that do not change.

HTable B-13identifies alarm defaults that change when the interface's line speed changes.

The thresholds for these alarms can be edited using NetScout Manager Plus so they match the values in the SLA between the customer and service provider. Up to eight alarms per interface are allowed. Any additional alarms are added to the Paradyne Area alarms and they cannot be changed using NetScout software.

See Editing Alarms in Chapter 8, Setting Up NetScout Manager Plus for

FrameSaver Devices.

Table B-12. Static DLCI Alarm Defaults ± NetScout Area (1 of 2)

					Rising	Falling
	Sample	MIB/Tag/OID 2		Event	Threshold	Threshold
Item	Type 1		Interval	Type	Default	Default
Current Latency	A	MIB: pdn_FrExt.mib (E)	60 secs	None	Must be	0
		Tag: devFrExtLatencyLatest	(1 min)		configured.
		OID: .1.3.6.1.4.1.1795.2.24.2.
		6.9.4.3.1.7.I.D
Average Latency	A	MIB: pdn_FrExt.mib (E)	900 secs	None	Must be	0
		Tag: devFrExtLatencyAvg	(15 mins)		configured.
		OID: .1.3.6.1.4.1.1795.2.24.2.
		6.9.4.3.1.5.I.D
Frames Received	D	MIB: FR DTE MIB	60 secs	None	Must be	0
		(RFC 2115)	(1 min)		configured.
		Tag: frCircuitReceivedFrames
		OID: .1.3.6.1.2.1.10.32.2.1.
		8.I.D
Frames Sent	D	MIB: FR DTE MIB	60 secs	None	Must be	0
		(RFC 2115)	(1 min)		configured.
		Tag: frCircuitSentFrames
		OID: .1.3.6.1.2.1.10.32.2.1.
		6.I.D

1D = Delta. Indicates that the calculated difference between the current value and the previous value is contained in the MIB.

A = Absolute. Indicates that the exact value for the item is contained in the MIB.

2I in the OID = Interface ID of the frame relay link. D = DLCI number.

B-20 May 2000 9123-A2-GB20-00