Paradyne 9123 manual LMI Packet Capture Utility → Display LMI Trace Log, LMI Trace Log Example

Troubleshooting

Viewing Captured Packets from the Menu-Driven User Interface

The twelve most recent LMI events are stored in the trace log. Once the capture buffer or trace log is full, the oldest packets are overwritten. To view the most recently captured packets using the menu-driven user interface:

LMI Packet Capture Utility → Display LMI Trace Log

LMI Trace Log Example

main/control/lmi_capture/display_log		9123-C-SLV
Device Name: Node A		3/26/2000 23:32
LMI TRACE LOG		Page 1 of 3
Packets Transmitted to Net1-FR!	Packets Received from Net1-FR1

LMI Record #1 at 0 s

Status Enquiry Message, 13 bytes

LMI Type is Standard on DLCI 1023

Sequence Number Exchange

Send Seq #181, Rcv Seq #177

LMI Record #2 at 0 s

Status Enquiry Message, 13 bytes

LMI Type is Standard on DLCI 1023

Sequence Number Exchange

Send Seq #181, Rcv Seq #177

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

Ctrl-a to access these functions, ESC for previous menu	MainMenu Exit
Refresh PgUp PgDn

Select Refresh to update the screen with the twelve most recently collected LMI messages.

The following information is provided:

HThe internal LMI record number assigned to the packet (1±8000), and the amount of time the utility was running when the packet was captured.

The maximum amount of time displayed is 4,294,967 seconds (s), which is reset to 1 second when this amount of time is exceeded.

HThe type of message, either Status or Status Enquiry, from the captured packet, and the number of bytes in the packet.

HThe LMI Type identified in the Protocol Discriminator portion of the captured packet, and the DLCI number for the packet.

HThe type of information contained in the captured packet, either Sequence Number Exchange or Full Status Report.

HThe send and receive (rcv) sequence numbers from the captured packet (0±255).

HOn the Packets Received side of the screen, PVC status for up to ten DLCIs can be shown. It shows the DLCI number, its active bit status, and if Standard LMI is running, the DLCI's CIR value.

6-6 May 2000 9123-A2-GB20-00