Paradyne 9123 manual Service Level Verification Performance Statistics

Operation and Maintenance

Service Level Verification Performance Statistics

These statistics appear when Service Level Verification (SLV) is selected from the Performance Statistics menu.

Main Menu → Status → Performance Statistics → Service Level Verification

They only appear for the network interface and only if DLCIs are multiplexed. In addition, this screen only appears for units with the FLEX SLV feature set, when Service Type is set to Frame Relay.

Table 5-12. Service Level Verification Performance Statistics (1 of 2)

Statistic	What It Indicates
Far End Circuit	Number of the multiplexed DLCI or VPI/VCI (Virtual Path
	Identifier/Virtual Channel Identifier) at the other end of the
	connection.
	If the far-end circuit is a DLCI, the DLCI number (16±1007)
	appears. If a VPI/VCI, the number is displayed as xx,yyy,
	xx being the VPI number (0 ±15) and yyy being the VCI
	number (32±2047).
	None appears if the unit has not communicated with the other
	end.
Far End IP Addr	IP Address of the device at the other end of the multiplexed
	DLCI connection.
	None appears if the FrameSaver unit has not communicated
	with the other end, or if the device at the other end of the
	multiplexed DLCI does not have an IP Address configured.
Dropped SLV	The number of SLV inband sample messages sent for which a
Responses	response from the far-end device has not been received.
Inbound Dropped	Total number of frames transmitted by the far-end device that
Frames *	were dropped in transit.
	The counts continue to increment until the maximum value is
	reached (232 ±2), then the count starts over.
	The SLV Delivery Ratio option (see Table 3-2, Service Level
	Verification Options) must be enabled for these statistics to
	appear.
H Above CIR *	H The number of frames transmitted by the far-end device that
	were above the committed information rate and were
	dropped in transit.

HWithin CIR *

HThe number of frames transmitted by the far-end device that were within the committed information rate, but were dropped in transit.

HBetween CIR&EIR *

HThe number of frames transmitted by the far-end device that were between the committed information rate and excess information rate, and were dropped in transit.

*Only appears for FrameSaver units when the SLV Delivery Ratio option is enabled.

5-28 May 2000 9123-A2-GB20-00