Paradyne 9123 manual Main Menu → Status → PVC Connection Status, PVC Connection Status 1 Field

Operation and Maintenance

PVC Connection Status

PVC connection statuses are selected from the Status menu.

Main Menu → Status → PVC Connection Status

Only PVC connections with Source DLCIs configured to be Active are shown.

This screen only appears when Service Type is set to Frame Relay.

PVC Connection Status Screen Example

main/status/connections						9123-C-SLV
Device Name: Node A					05/26/1999 23:32
						Page 1 of 2
			PVC CONNECTION STATUS
	Source	Primary Destination
Link	DLCI EDLCI Link		DLCI	EDLCI	Status
Port-1	201	Net1-FR1	300	0	Active
Port-1	202	Net1-FR1	1001	0	Active
Port-1	100	Net1-FR1	1001	2	Active
Port-1	204	Net1-FR1	1001	2	Active
Mgmt PVC Mgm205		Net1-FR1	1001	2	Active
Port-1	206	Net1-FR1	1001		Active
Port-1	207	Net1-FR1	1001		Active
Port-1	208	Net1-FR1	500		Active
Port-1	209	Net1-FR1	502	2	Inactive
Port-1	210	Net1-FR1	504	2	Inactive

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

ESC for previous menu	MainMenu Exit
Refresh PgUp PgDn

If the No PVC Connections message appears instead of a list of PVC connections, no PVC connections have been configured yet.

Table 5-10. PVC Connection Status (1 of 2)

Field

Link

DLCI

Status	What It Indicates
	Identifies the cross-connection of
	DLCIs configured for the unit.
Net1-FR1	H Source/destination is frame relay
	link 1 on Network 1
Port-1	H User data port ± Port-1
Mgmt PVCName	H Virtual circuit is a management
	link that terminates in the unit,
	where Name is the link name
16 to 1007	For standard DLCIs.
	Identifies an individual link/
	connection embedded within a
	DLCI.

5-20 May 2000 9123-A2-GB20-00