Paradyne 9123 manual Alarm Conditions 2 What It Indicates What To Do, Operational appears

Troubleshooting

Table 6-1. Alarm Conditions (2 of 4)

Alarm Condition	What It Indicates	What To Do
Ethernet Link Down	The communication link for	Check the LAN connected to the
	the Ethernet port is down	Ethernet port.
	and the Interface Status for
	the port is enabled.
Link Down	The specified frame relay	Verify that the network LMI is up.
Administratively,	link has been disabled by	If it is, contact your network
frame relay link 2	the unit due to LMI	provider.
	Behavior conditions or LMI
	Protocol on another link is
	in a failed state.
	This is not an alarm
	condition so System
	Operational appears,
	as well.
LMI Down,	The Local Management	For the network interface:
frame relay link 2	Interface is down for the	H If LMI was never up, verify
	specified frame relay link.
		that the LMI Protocol setting
		reflects the LMI type being
		used.
		H If LMI was never up:
		± Verify that the proper time
		slots have been configured.
		± Verify that the LMI Protocol
		setting reflects the LMI type
		being used.
		H Verify that Frame Relay
		Performance Statistics show
		LMI frames being transmitted.
		If all of the above have been
		verified and the physical link is
		not in Alarm, contact your
		network provider.

2 frame relay link is one of the following:

± Net1-FR1. The frame relay link specified for the network port, Network 1.

± Port-1. The frame relay link associated with the user data port.

6-8 May 2000 9123-A2-GB20-00