Paradyne 9123 manual Interface Frame Relay Options 3, Frame Relay DS0s Base Rate

Configuration

Table 3-6. Interface Frame Relay Options (3 of 3)

LMI Inbound Heartbeat (T2)

Possible Settings: 5, 10, 15, 20, 25, 30

Default Setting: 15

Configures the LMI-defined T2 parameter, which sets the number of seconds between the receipt of status enquiry messages on the network side of the LMI. Applies to the network side of a UNI only.

5 ± 30 ± Specifies the number of seconds between the receipt of status enquiry messages in increments of 5.

LMI N4 Measurement Period (T3)

Possible Settings: 5, 10, 15, 20, 25, 30

Default Setting: 20

Configures the LMI-defined T3 parameter, which is the time interval (in seconds) that the network side of the LMI uses to measure the maximum number of status enquiry messages that have been received (N4) from the user side.

5 ± 30 ± Specifies the interval of time in increments of 5.

Frame Relay DS0s Base Rate

Possible Settings: Nx64, Nx56

Default Setting: Nx64

Selects the base rate for the DS0s allocated to frame relay on the network interface.

Display Conditions ± This option only appears for the network interface.

Nx64 ± The base rate is 64 kbps.

Nx56 ± The base rate is 56 kbps.

3-36 May 2000 9123-A2-GB20-00