Parker Hannifin
Chapter 6 Command Reference 129
................................................................MPMxxxxxxxxJLxx: ERES10000
................................................................MPMxxxxxxxxJPxx: ERES12000
................................................................MPMxxxxxxxxJQxx: ERES20000
................................................................MPMxxxxxxxxJTxx: ERES24000
................................................................MPMxxxxxxxxJXxx: ERES4096
................................................................MPMxxxxxxxxJYxx: ERES8192
................................................................MPMxxxxxxxxJZxx: ERES16384
Note: Motors with the Smart Encoder option set ERES automatically.
Changing the ERES value may cause unpredictable motor responses.
Note: ERES is fixed at 4096 for Aries drives with Resolver option.
Daedal Positioning Tables (encoder options)
-E2...........................................................ERES42000
-E3...........................................................ERES84000
-E4...........................................................ERES420000
-E5...........................................................ERES8400
For linear servo motors, use the following equation to determine the proper
ERES, based on both the encoder resolution and the motor’s electrical (or
magnetic) pitch (DMEPIT).
)
( _
)(
count
mm
resolutionEncoder
mmDMEPIT
ERES =
Example
Linear encoder resolution (post quad) is 1 μm and the electrical pitch is 42
mm (DMEPIT42). ERES is calculated as:
42000
)
( 101
)( 42
3- =
⋅
=
count
mm
mm
ERES
ERROR Error-Checking Report-Back
Type Error Handling Product Rev
Syntax <a_>ERROR Aries 1.0
Units N/A
Range
Default N/A
Response ERROR: <*>NO ERRORS
See Also none
The ERROR command gives a text-based status report of drive errors
(E25 through E46) that currently prevent the drive from enabling.
To re-enable the drive correct the specified fault, then reset the drive or cycle
power to it.
Table 46 contains the possible errors appearing in the text-based report and
their descriptions.