Parker Hannifin
122 Aries User Guide
DNOTBF Notch Filter B Frequency
Type Tuning Product Rev
Syntax <a_><!>DNOTBF<i> Aries 2.0
Units i = Hz
Range Ø (disable), or 6Ø-1ØØØ
Default Ø (filter is disabled)
Response DNOTBF: *DNOTBF2ØØ
See Also DNOTAD, DNOTAF, DNOTAQ, DNOTBD, DNOTBQ,
DNOTLD, DNOTLG
The DNOTBF command sets the center frequency for notch filter B. Setting
this to 0 disables the filter. For a description of the filter’s transfer function
characteristics, refer to the DNOTAF command description.
DNOTBQ Notch Filter B Quality Factor
Type Tuning Product Rev
Syntax <a_><!>DNOTBQ<r> Aries 2.0
Units r = quality factor
Range Ø.5 to 2.5
Default 1
Response DNOTBQ: *DNOTBQ1.5
See Also DNOTAF, DNOTAQ, DNOTBD, DNOTBF, DNOTLD,
DNOTLG
The DNOTBQ command sets the quality factor (Q) for notch filter B. The
quality factor, or width of the frequency trough, determines how discrete the
filter is.
For information about the filter’s transfer function characteristics, see
DNOTAF.
DNOTLD Notch Lead Filter Break Frequency
Type Tuning Product Rev
Syntax <a_><!>DNOTLD<i> Aries 2.0
Units i = Hz
Range Ø (disable), or 8Ø-1ØØØ
Default Ø (filter is disabled)
Response DNOTLD: *DNOTLD2ØØ
See Also DNOTAD, DNOTAF, DNOTAQ, DNOTBD, DNOTBF,
DNOTLG
The DNOTLD command sets the break frequency of the lead filter. This filter
cannot be used alone, but must be used in conjunction with the DNOTLG lag