5.Use the mouse to draw a mask in the selected video pane. Motion must occur in the masked area for an image to be displayed during the smart search. To clear a mask, click the Mask Color box and select Clear Mask; to reverse the mask, select Inverse Mask.

6.Adjust the Blocks Requiring Motion slider bar to select the number of “blocks” in the mask that must exhibit motion for an image to be displayed during the smart search. Adjust the % Motion Required slider bar to select the pixel value (color) change that must occur in a block for motion to be identified.

After the smart search is configured, you can perform the search in one of the following ways:

Next Frame: This button displays the next image in the video clip that meets the smart search parameters.

Play Frames: This button sequentially displays all images that meet the smart search parameters.

Build Search List: This button compiles all images that meet the smart search parameters. When the search list is complete, the Play Smart Search List option is activated, and the number of images in the clip that meet the smart search parameters is displayed.

While Play Smart Search List is selected, click the play button at the top of the screen. This plays back all images in the search list.

Other smart search features include:

You can cancel a smart search in progress by clicking Cancel Search.

You can zoom into a video pane selected for a smart search by selecting Zoom in the On Mouse Click area.

You can select a new video pane for a smart search by selecting an option other than Smart Search, and then clicking the camera icon on the Search tab.

CLIENT MANAGER

Client Manager allows you to monitor the status of your connection to DS systems and control several operation parameters. Click the following button to open Client Manager:

The following information is listed within the Client Manager (refer to Figure 40):

Figure 40. Client Manager Window

System Name: The name of each configured server in the .INI file

Connected As: The user name that connects you to the system

Connected: If selected, you are currently connected to the system

Notify On Event: If selected, you will be notified when an event occurs on the system

Critical Msgs: If selected, you will be notified when critical messages occur on the system

Warning Msgs: If selected, you will be notified when warning messages occur on the system

Informational Msgs: If selected, you will be notified when informational messages occur on the system

Auto Connect: If selected, Auto Connect is currently turned on for the system

Information in the Connected, Notify On Event, and the three “Msgs” columns can be changed with the proper permissions. Refer to User Administration on page 24 and DSAdmin on page 10 for information on the Disable Error Monitor and Disable Event Monitor user permissions.

C3663M-B (11/09)

47

Page 47
Image 47
Pelco DS NVS manual Client Manager