English
12
Remote Control
a 2
– Turns the recorder on or to standby
mode.
b TV/HDD
(only applicable when using the EXT1 TO
TV-I/O scart socket to connect your TV)
– Switches to the device that is connected
to the EXT2 AUX-I/O scart socket of
this recorder.
– Toggles between the recorder and TV
mode if there is no video input signal
from EXT2 AUX-I/O scart socket.
c SELECT DEVICE
– Selects the active source mode: HDD,
SACD, AMP or TV.
3
2
1
4
7
8
10
11
12
6
5
13
9
d INFO m
– Displays the Time Shift video bar while in
tuner mode. It shows the timing of the
TV programmes stored in the temporary
HDD storage.
– Accesses the programme details in the
GUIDE Plus+ system and when viewing
digital tuner information.
e  : Cursor buttons for moving to the
left/right, or jump backward or forward
by a speci ed length of time in tuner
mode.
 : Cursor buttons for moving up/
down or select previous/next title in the
temporary HDD storage during playback.
f OK
– Con rms an entry or selection.
g SYSTEM
– Enters/Exits the system setup menu.
h CH +-
– While in tuner or camcorder mode,
selects the next or previous TV channel
or the external input source (EXT1,
EXT2, CAM1).
– Skips to the next page up or down in the
GUIDE Plus+ system.
i HDD-BROWSER
– Enters/Exits the content browser menu.
j TIMER
– Enters/exits the timer recording menu.
k REC
– Starts recording the current TV
programme or the current video input
source.
– Marks the title in the time shift buffer for
recording onto the HDD.
l TEXT
– Enters/exits the MHEG service
(interactive teletext - for UK only).
m EDIT
– Enters/exits the editing menu.
dvdr9000h_eu_eng2.indd 12dvdr9000h_eu_eng2.indd 12 2005-10-13 9:18:04 AM2005-10-13 9:18:04 AM