Record to Hard Disk or recordable DVD (continued)
Recording from an external device (VCR/DVD player)
You can record from an external device which is connected to this recorder’s input socket.
IMPORTANT!
It is not possible to record the disc playback from this recorder to its HDD.
A Connect the external device to this recorder (see page 22).
B Turn on the TV to the correct programme number for the recorder (e.g. ‘EXT’, ‘0’, ‘AV’).
C Turn on the recorder and press CAM on the remote control.
A warning message appears.
D To continue, select to record to { Hard Disk } or { Recordable DVD } in the menu and press OK to confirm.
All the contents in the temporary
HDD storage will be cleared except for the ‘marked’ recordings.
Otherwise, select { Cancel } in the menu and press OK to abort the operation.
E Press CH +/- repeatedly to select the correct input channel that matches the connected socket of the device.
{CAM 1 } :
{EXT 1 } : EXT1 TO
{EXT 2 } : EXT2
F Start playback on the connected device. G Press (RECORD) to start recording.
To pause the recording, press Å (PAUSE). To continue recording, press Å (PAUSE) again.
You can use this function to avoid unwanted recording.
A new chapter marker is created after recording restarts.
H To stop the recording, press (STOP). I To exit, press TUNER.
Helpful Hint:
–If ‘X’ appears at the bottom of the TV screen, it means that there is no video signal received from the current input channel.
English
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a recordable DVD, see page 38.
49
dvdr9000h_eu_eng2.indd 49
