English
77
System Menu Options (continue d)
Access settings (underlined options are the factory default settings)
You will be prompted to enter the four-digit pin code.
– When doing this for the rst time, use the alphanumeric keypad 0-9
on the remote control to enter any four-digit pin code you prefer.
– If you forget your four-digit pin code, key in ‘1504’. Then enter any
four-digit you prefer and enter the same pin code again to con rm it.
Childlock With this feature, you can prevent children from viewing certain discs or
the recorded titles in the HDD. When this feature is enabled, it will
appear as { CHILDLOCK } at the bottom of the coloured options screen
whenever you select a title in the content menu. You can press the
Yellow button on the remote control to set the childlock on or off.
Note: This recorder can memorise settings for 50 discs.
{ On } – Turns on child lock function.
A four-digit pin code must be entered in order to play
the locked disc or title in the HDD.
{ Off } – All discs can be played.
Change pin Use the alphanumeric keypad 0-9 to enter your new four-digit pin code.
You must enter the same pin code again to con rm it.
To cancel your change, press to select { Cancel } in the menu and
press OK on the remote control.
Features settings (underlined options are the factory default settings)
Auto resume With this feature, you can resume playback of the disc from where it last
stopped point. This applies to the last 20 DVDs and Video CDs you
played.
{ On } – Turns on auto resume mode.
{ Off } – The disc will always start from the beginning when you
load a disc or start playback.
####
Enter PIN of your choice
This will be used to access locked features.
Pin Code
Cancel
dvdr9000h_eu_eng2.indd 77dvdr9000h_eu_eng2.indd 77 2005-10-13 9:18:21 AM2005-10-13 9:18:21 AM