Before Recording
English
About temporary HDD storage/Time Shift video bar
The current TV programme will be stored in the temporary hard disk storage called ‘TSB’ (Time Shift Buffer) once the recorder is turned on. It will continuously store up to 6 (six) hours of TV programmes.
The Time Shift video bar will appear on the TV. It indicates the status and timing of the TV programmes stored in the temporary HDD storage. You can choose to display or remove the video bar by pressing the INFO m button on the remote control.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
21:00 |
|
|
|
|
| 23:13 | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Time Shift video bar consists of the following information:
aThe TV programme start time.
Once it has exceeded 6 (six) hours, the beginning of the contents will be deleted and the start time will be changed accordingly.
bRemaining space in the temporary storage.
cClips that are selected to be recorded onto the HDD (marked Red).
dCurrent position and time of the TV programme broadcast.
eTitle markers (when you switch to a TV channel for more than 1 minute, a new title marker will be created)
fPresent time
gProgramme information
Warning!
The temporary HDD can only store up to 6 hours of TV programmes. All the contents will be cleared when you press
In addition, executing the following actions will also clear the contents in the temporary HDD storage :
–Press CAM on the remote control.
–Enter to { Setup } or { Record mode } option in the system setup menu.
This action will clear the Time Shift Buffer.
Do you want to continue?
Yes
No
i)To proceed and clear the contents in the temporary HDD storage, press OK on the remote control to select { Yes } in the menu, OR
ii)Select { No } in the menu and press OK on the remote control to abort.
Marking the contents for recording
You need to ‘mark’ the contents in the temporary HDD storage before it can be recorded to the hard disk drive (HDD), see page 39.
To select a title (programme) Press INFO m to show the overview
panel and use | keys to select a title. | |
To find a scene within the title | ||
Use | keys. |
|
To record the current programme Press (RECORD) once. Press the
(RECORD) again to start a 30 minutes recording.
To mark for recording from the current scene
Press the Red button.
To cancel the marked recording
Press the Red button.
To end the recording
Press (STOP).
36
dvdr9000h_eu_eng2.indd 36
