100
Sound Level Monitoring:
Problem | Cause | Solution |
1. False high sound alarms occur | The programmed sound sensitivity results in | Reprogram the sound sensitivity. |
frequently. | Refer to Chapter 5, Section 5.10. | |
| alarm sound. |
|
| Sound Recognition Time is too short. | Lengthen the sound Recognition Time. |
|
| Refer to Chapter 5, Section 5.10. |
|
|
|
2. High sound does not cause an alarm. | The unit is not close enough to the high sound | Move the unit closer or reprogram the sound |
| source, or the programmed sound setting | sensitivity. |
| results in a lack of sensitivity to high sound. | Refer to Chapter 5, Section 5.10. |
Other Monitoring: |
|
|
|
|
Problem | Cause | Solution | |
1. | Alarm status of an alert input is | Incorrect input normality. | Reconfigure the input. |
| incorrect. |
| Refer to Chapter 5, Section 5.1. |
|
|
|
|
2. | False power out alarms | Programmed Recognition Time is too short. | AC power is often subject to brief |
|
|
| interruptions. To avoid frequent, false alarms, |
|
|
| increase the power Recognition Time. |
|
|
| Refer to Chapter 5, Section 5.9. |
|
|
|
|
