answering device is connected to the
same line as the Model 1104 (and TAD
is enabled), the Model 1104 will answer
on the first ring. First, it recites the
Status Report, followed by:
“Warning message received by telephone
number...(the last number it dialed).
“Have a good day.”
When the Model 1104 hangs up, the
alarm is acknowledged and dial-out
stops.
• If calls remain unanswered, or if they are
received by an answering machine or
FAX, the Model 1104 continues the
dialout sequence; it waits the Intercall
Time and proceeds to dial the next
telephone number. Telephone numbers
are dialed sequentially, and this cycle
continues for the number of Max Calls
programmed. If no acknowledgment
occurs, then at the completion of Max
Calls, the alarm is automatically
acknowledged and the dial-out process is
terminated.
Chapter 7:Operation
93
Tone or Pulse
Callback
Acknowledgment:
TAD Enabled
Max Calls
Acknowledgment
IV.The Alarm Is Acknowledged Variable Factors
NOTE
Acknowledging the alarm does not correct the
situation! The alarm condition will still exist until the
sensor is restored to its normal state.