6. Now press PAUSE once to activate a four second delay. This
assumes the call is answered by a beeper/pager service that
immediately delivers a prerecorded voice message. PAUSE
may be pressed more than once to program more time for the
beeper/pager service to finish its message. Each press of
PAUSE allocates four additional seconds. The Model 1104
will“beep” with each press.
7. Enter a telephone number or custom code number that will
identify the Model 1104 as the caller to your beeper or pager.
A code may consist of any number(s) you designate. Many
users find it convenient to use the telephone number to which
the Model 1104 is connected.
8. A pound or asterisk may be required in some dialing
situations. If required, position the pound (#) or asterisk (*)
within the telephone number where required by pressing SET
(where the pound is located) or WHAT IS (where the asterisk
is located). The Model 1104 will“beep” each time pound or
asterisk is pressed. Enter any remaining digits of the telephone
number.
–OR–
9. Press ENTER. The Model 1104 will say“Enter.”
ENTER
TONE
PM
ENTER
TONE
PM
WHAT
IS
*
SET
#
1
CALL
DELAY
2
VOICE
REPS
3
INTERCALL
TIME
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
7
RECOGNITION
TIME
8
CLOCK
9
LISTEN TIME
SOUND
0
ID NUMBER
POWER
RING/TAD
PAUSE
AM
Chapter 4: Communications Programming
43